
Clocks · Longcase clock
George III mahogany eight-day longcase clock with moonphase
- Maker / attribution
- Thomas Bullock (source attribution)
- Date
- c. 1770
- Historical period
- Precision & Scientific Horology (1750 – 1850)
- Country of origin
- United Kingdom
- Object type
- Longcase clock
- Auction house
- Dreweatts 1759
- Lot
- 134
- Credit line
- Dreweatts 1759
- Catalogue title (original)
- A GEORGE III MAHOGANY EIGHT-DAY LONGCASE CLOCK WITH MOONPHASETHOMAS BULLOCK, BATH, CIRCA 1770The (English)
View the source record (auction lot) ↗ (opens another website in a new tab)Suggest a correction
Record summary
Catalogued by Dreweatts 1759 (lot 134), this is a longcase clock attributed to Thomas Bullock, made in United Kingdom, dated c. 1770. The Atlas places it in the Precision & Scientific Horology period (1750 – 1850) of its Clocks collection. The record is illustrated with 1 photograph.
Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.
Catalogue description
Original object description
Signed "Tho's, Bullock, BA,TH" at the base of its 12-inch brass break-arch dial, this George III longcase clock dates from approximately 1770. Applied to the dial is a silvered chapter ring with Roman hours and Arabic five-minute markings framed by cast Rococo scroll spandrels. The engraved centre depicts a square-rigged vessel sailing past a lighthouse, accompanied by a subsidiary seconds dial and an arched calendar window. Set in the arch, painted celestial and terrestrial lunettes flank a rolling moon disc calibrated to register the lunar cycle, showing evidence of older paint restoration. The mahogany case is detailed with an ogee cornice over geometric key fretting, glazed side apertures, rear quarter columns on bargeboards, and three-quarter front columns framing the glazed arched hood door. Below a concave throat moulding, the trunk door features caddy moulding, resting on a plinth with integral bracket feet. Documented repairs and condition issues include an altered door lock, a replacement top board to the hood, a full vertical split down the trunk door, veneer fractures and patching on the base, a replaced hour hand, and a repaired minute hand. Supported on its original seatboard atop the cheeks, the four-pillar, eight-day movement features an anchor escapement, a seconds pendulum, and rack-operated bell striking.
Historical context
Precision & Scientific Horology (1750 – 1850)
Harrison solves longitude; Mudge invents the lever; Breguet's Paris workshop defines the modern watch.
The age of the deadbeat escapement, compensated pendulums and observatory regulators. Domestic clocks spread through the middle classes: English longcase and bracket clocks, French gilt-bronze mantel clocks, Viennese Biedermeier wall clocks, Black Forest painted-shield clocks, and the first American shelf clocks.
Read the period in the timelineMore clocks from this periodEarlier: Early Modern Horology
Atlas type guide
Longcase (tall-case or grandfather) clocks
The longcase clock was born from two seventeenth-century innovations: Christiaan Huygens's pendulum (1656–57) and the anchor escapement (c. 1670). A long seconds pendulum, nearly a metre long, swings with a small arc, and enclosing it together with the driving weights in a tall wooden case protected the mechanism and created a new piece of furniture. London makers such as Ahasuerus Fromanteel, Thomas Tompion and Joseph Knibb set the pattern.
By the eighteenth century longcase clocks were made throughout Britain, the Netherlands, Scandinavia (the Swedish Mora clock), France (the Comtoise from the Franche-Comté), Germany and colonial America. Eight-day movements with two weights became standard in better clocks; thirty-hour clocks with one weight and a rope or chain were cheaper alternatives.
What to look for
- Winding holes in the dial: two (eight-day, going and striking) or none (thirty-hour, pulled up by a chain).
- Brass dials with applied chapter rings (earlier) versus painted iron 'white' dials (after c. 1770 in Britain).
- Moon-phase arches, date apertures, seconds dials and maker's name on the dial.
- Case woods and style: ebonised, walnut marquetry, lacquer, oak or mahogany; regional styles from London, Lancashire, Scotland or America.
- Whether the movement and dial match the case — 'marriages' are common.
Dating clues
- Square brass dials suggest c. 1670–1720; arched brass dials c. 1715–1790.
- Painted (white) dials were made by Birmingham dial-makers from about 1772.
- Comtoise clocks with repoussé pendulums are mostly nineteenth century.
General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.
Read next:Deadbeat escapementAnchor escapement
Related records
Clocks · 1798
Tall Case Clock
Yale University Art Gallery, New Haven
Clocks · c. 1800
Wall clock by Warren, Canterbury, c. 1800
Howard Walwyn Fine Antique Clocks (dealer), London
Clocks · c. 1800
Clock by Samuel Sly, Norwich, c. 1800
Howard Walwyn Fine Antique Clocks (dealer), London
Clocks · c. 1840–1845
Bracket clock by Whitehurst & Son, Derby, c. 1840–1845
Howard Walwyn Fine Antique Clocks (dealer), London
Clocks · 1775
Tavern clock by John May, Southampton, 1775
Howard Walwyn Fine Antique Clocks (dealer), London
Clocks · c. 1795
Longcase clock by George Stoddart, c. 1795
Howard Walwyn Fine Antique Clocks (dealer), London
Clocks · c. 1830–1835
Bracket clock by Priest, Norwich, c. 1830–1835
Howard Walwyn Fine Antique Clocks (dealer), London
Clocks · c. 1785
Clock by Thomas Smoult, Newcastle, c. 1785
Howard Walwyn Fine Antique Clocks (dealer), London
