
Clocks · Longcase clock
George III mahogany eight-day longcase clock with moonphase, James De Lasalle
- Maker / attribution
- James De Lasalle (source attribution)
- Date
- c. 1775
- Historical period
- Precision & Scientific Horology (1750 – 1850)
- Country of origin
- England
- Place
- London
- Object type
- Longcase clock
- Dimensions
- 243cm high, 53cm wide, 26cm deep
- Auction house
- Dreweatts 1759
- Lot
- 175
- Credit line
- Dreweatts 1759
- Catalogue title (original)
- A GEORGE III MAHOGANY EIGHT-DAY LONGCASE CLOCK WITH MOONPHASEJAMES DE LASALLE, LONDON, CIRCA 1775 (English)
View the source record (auction lot) ↗ (opens another website in a new tab)Suggest a correction
Record summary
Catalogued by Dreweatts 1759 (lot 175), this is a longcase clock attributed to James De Lasalle, made in London, England, dated c. 1775. The Atlas places it in the Precision & Scientific Horology period (1750 – 1850) of its Clocks collection. Recorded dimensions: 243cm high, 53cm wide, 26cm deep. The record is illustrated with 1 photograph.
Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.
Catalogue description
Original object description
Circa 1775, this George III longcase clock is housed in a flame-figured mahogany case surmounted by a concave pagoda top with pierced foliate frets and three vacant sockets formerly holding finials. The hood features a cavetto cornice, lateral viewing windows, rear quarter columns, and brass stop-fluted front columns. Flanked by matching brass stop-fluted quarter columns, the trunk door of arched flame mahogany sits above a plinth with a raised panel and concave upper moulding; the base rests on a shaped apron and double skirt noted as repaired or replaced, with a stable split present at the back left carcass edge. Measuring 12 inches across, the brass break-arch dial is inscribed along its upper edge "Ja's De Lasalle, London". Horological sources compiled by F.J. Britten locate De Lasalle in Moorfields in 1780 and subsequently near Tower Hill from 1800 to 1818. Corner Rococo spandrels flank an applied silvered Roman and Arabic chapter ring, whilst the matted centre shows an exposed detent pivot, evidence of calendar pulleys, a plugged hole situated over the date aperture, and a silvered subsidiary seconds dial with bright-cut decoration. Displayed in the arch is a rolling moon mechanism framed by globe lunettes, a sunburst mask, and a calibrated lunar register. Operating via five pillars, the eight-day brass movement is powered by two trains and uses an anchor escapement, a seconds pendulum, and rack-and-bell striking, resting directly on the case cheeks on its original seatboard.
Historical context
Precision & Scientific Horology (1750 – 1850)
Harrison solves longitude; Mudge invents the lever; Breguet's Paris workshop defines the modern watch.
The age of the deadbeat escapement, compensated pendulums and observatory regulators. Domestic clocks spread through the middle classes: English longcase and bracket clocks, French gilt-bronze mantel clocks, Viennese Biedermeier wall clocks, Black Forest painted-shield clocks, and the first American shelf clocks.
Read the period in the timelineMore clocks from this periodEarlier: Early Modern Horology
Atlas type guide
Longcase (tall-case or grandfather) clocks
The longcase clock was born from two seventeenth-century innovations: Christiaan Huygens's pendulum (1656–57) and the anchor escapement (c. 1670). A long seconds pendulum, nearly a metre long, swings with a small arc, and enclosing it together with the driving weights in a tall wooden case protected the mechanism and created a new piece of furniture. London makers such as Ahasuerus Fromanteel, Thomas Tompion and Joseph Knibb set the pattern.
By the eighteenth century longcase clocks were made throughout Britain, the Netherlands, Scandinavia (the Swedish Mora clock), France (the Comtoise from the Franche-Comté), Germany and colonial America. Eight-day movements with two weights became standard in better clocks; thirty-hour clocks with one weight and a rope or chain were cheaper alternatives.
What to look for
- Winding holes in the dial: two (eight-day, going and striking) or none (thirty-hour, pulled up by a chain).
- Brass dials with applied chapter rings (earlier) versus painted iron 'white' dials (after c. 1770 in Britain).
- Moon-phase arches, date apertures, seconds dials and maker's name on the dial.
- Case woods and style: ebonised, walnut marquetry, lacquer, oak or mahogany; regional styles from London, Lancashire, Scotland or America.
- Whether the movement and dial match the case — 'marriages' are common.
Dating clues
- Square brass dials suggest c. 1670–1720; arched brass dials c. 1715–1790.
- Painted (white) dials were made by Birmingham dial-makers from about 1772.
- Comtoise clocks with repoussé pendulums are mostly nineteenth century.
General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.
Read next:Deadbeat escapementAnchor escapement
Related records
Clocks · 1740–1760
Longcase clock, English, 1740–1760, japanned wood, John Ellicott
Victoria and Albert Museum, London
Clocks · c.1750
Long-case clock, English, ca. 1750, by Richard Peyton of Gloucester
Victoria and Albert Museum, London
Clocks · 1751
Large wheel engine, signed and dated "John Tipping, Whildon Green, 1751".
Science Museum Group, London
Clocks · 1755
Bracket clock by John Fordham, England, 1755
The Metropolitan Museum of Art, New York
Clocks · c. 1760
Longcase clock by James Cox, England, c. 1760
Victoria and Albert Museum, London
Clocks · 1766
Clock by Alexander Cumming, England, 1766
Science Museum Group, London
Clocks · 1768–1769
Regulator clock by John Shelton, England, 1768–1769
Science Museum Group, London
Clocks · c. 1775
Longcase clock, England, c. 1775
Victoria and Albert Museum, London
