Skip to content

Pocket Watches · Pair-cased verge pocket watch

George II provincial silver pair-cased verge pocket watch by Jonathan Stripe

DocumentedDocumented from an auction catalogue; attribution as stated by the auction house.
Maker / attribution
Jonathan Stripe (source attribution)
Date
1752
Country of origin
United Kingdom
Object type
Pair-cased verge pocket watch
Dimensions
Pillar plate 3.6 cm; inner case 4.2 cm; outer case 5 cm
Auction house
Dreweatts
Lot
1093
Credit line
Dreweatts
Catalogue title (original)
A RARE GEORGE II PROVINCIAL SILVER PAIR-CASED VERGE POCKET WATCH WITH CHAMPLEVE 'NAME' DIAL (English)

View the source record (auction lot) ↗ (opens another website in a new tab)Suggest a correction

Record summary

Catalogued by Dreweatts (lot 1093), this is a pair-cased verge pocket watch attributed to Jonathan Stripe, made in United Kingdom, dated 1752. The Atlas places it in the Precision & Scientific Horology period (1750 – 1850) of its Pocket Watches collection. Recorded dimensions: Pillar plate 3.6 cm; inner case 4.2 cm; outer case 5 cm. The record is illustrated with 1 photograph.

Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.

Catalogue description

Original object description

Produced in the United Kingdom in 1752, this George II silver pair-cased verge pocket watch was fashioned by Jonathan Stripe, a maker known to have worked in Chichester circa 1742, for John Hammond of Havant. Instead of standard numerals, the silver champlevé name dial displays the letters of "IOHN HAMMOND" to mark the hours, with the twelve position designated by a fleur-de-lys. Blued steel hands in the beetle and poker style traverse the face, which incorporates two curved central cartouches inscribed "HAVANT" and "1752", surrounded by five-minute divisions indicated by Arabic figures set in reserve. Housed inside is a gilt full-plate fusee movement signed "Jn'o, Stripe, CHICHESTER" and bearing the movement number 1694. This mechanism features four square-profile baluster pillars, a stop-iron block pierced with scrolling foliage, a three-armed sprung brass balance equipped with a Tompion-type regulator, and an openwork balance cock adorned with scrolling decoration and a grotesque face. Measuring 3.6 cm across the pillar plate, the movement is enclosed in an inner silver case measuring 4.2 cm with an integrated pendant, bow, and an illegible maker's mark. The protective outer silver case measures 5 cm across its molded rim and is inscribed with the initials "I*H" alongside the year 1767.

Inscriptions & marks

1694

Historical context

Precision & Scientific Horology (1750 – 1850)

Harrison solves longitude; Mudge invents the lever; Breguet's Paris workshop defines the modern watch.

From 1750 to 1850 the watch became a precision instrument. Mudge's lever escapement, the cylinder escapement, Lépine's thin bar calibre, Breguet's innovations (overcoil, tourbillon, perpétuelle) and the pocket chronometer of Arnold and Earnshaw all date from this period, while verge watches remained common in cheaper production.

Read the period in the timelineMore pocket watches from this periodEarlier: Early Modern Horology

Atlas type guide

Verge and pair-cased watches

After Christiaan Huygens and Robert Hooke applied the balance spring around 1675, the verge watch became a reasonably reliable timekeeper and the minute hand became standard. Through the eighteenth century the typical English watch was a pair-cased verge: a fusee movement with a pierced, engraved balance cock, housed in an inner case and a separate protective outer case, often of repoussé gold, shagreen, tortoiseshell or enamel.

French watches of the same period were thicker 'oignons', later replaced by elegant thinner watches following Jean-Antoine Lépine's bar-bridge calibre of c. 1770. Dutch, Swiss and German makers supplied international markets, and verge watches were made until the mid-nineteenth century as cheaper alternatives to the cylinder and lever.

What to look for

  • The pierced balance cock on the backplate: winged (continental) or with a foot (English); its style dates the watch.
  • Fusee and chain visible through the movement; key winding through the dial (early) or case back.
  • Hallmarks inside English silver or gold cases, which give a date letter.
  • Maker's name and serial number engraved on the backplate; watch papers inside outer cases.
  • Enamel dials (after c. 1720) versus earlier champlevé metal dials.

Dating clues

  • Champlevé dials: c. 1680–1730; white enamel dials thereafter.
  • English case hallmarks give the year of assay to within a year.
  • Verge watches persisted in cheap production until c. 1850.

General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.

Read next:Balance spring (hairspring)Verge escapement

Related records