Instruments · Sidereal deck watch
Sidereal deck watch no. 4354 by International Watch Co
- Maker / attribution
- International Watch Co (maker)
- Date
- c. 1944
- Historical period
- Golden Age of Mechanical Watchmaking (1900 – 1945)
- Country of origin
- Switzerland
- Object type
- Sidereal deck watch
- Materials / technique
- metal: stainless steel; enamel; glass; wood
- Dimensions
- Watch: 52 x 71 x 15 mm; Box: 95 x 40 x 135 mm
- Holding institution
- Royal Museums Greenwich
- Accession / object no.
- ZAA0114
- Credit line
- National Maritime Museum, Greenwich, London
- Catalogue title (original)
- 4354 (English)
View the source record ↗ (opens another website in a new tab)Suggest a correction
Record summary
Held and catalogued by Royal Museums Greenwich (object number ZAA0114), this is a sidereal deck watch by International Watch Co, made in Switzerland, dated c. 1944. The Atlas places it in the Golden Age of Mechanical Watchmaking period (1900 – 1945) of its Instruments collection. Materials and techniques recorded by the source: metal: stainless steel; enamel; glass; wood. Recorded dimensions: Watch: 52 x 71 x 15 mm; Box: 95 x 40 x 135 mm. The record is illustrated with 4 photographs.
Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.
Catalogue description
Catalogue description — Royal Museums Greenwich
Deck watch in stainless steel open-face case, in a wooden deck box. Three-quarter plate movement, signed and numbered ‘1014354’, with lever escapement and compensation balance. The watch has a white enamel dial, numbered and marked with a broad arrow, with arabic numerals and steel spade and poker hands, and a centre-seconds indication with a steel hand. It is contained in a stainless steel open-face case, with a screw-down back numbered ‘1014354’ and marked ‘SIDEREAL / H.S. ^ 3’. The watch is housed in a wooden deck box. The Admiralty record card for this watch has not survived, though other deck watches with serial numbers either side of this example were purchased in 1944.
Historical context
Golden Age of Mechanical Watchmaking (1900 – 1945)
The wristwatch displaces the pocket watch; waterproof cases, self-winding and grand complications.
Timing instruments became electrical and specialised: industrial time recorders, sports timers and aviation instruments.
Read the period in the timelineMore instruments from this periodEarlier: Industrial Revolution
Atlas type guide
Marine chronometers
A marine chronometer is a precision timekeeper carried at sea to find longitude: the navigator compares local noon, observed with a sextant, with the time at a reference meridian kept by the chronometer. Each hour of difference corresponds to fifteen degrees of longitude. John Harrison proved the method in the 1760s; Pierre Le Roy, Ferdinand Berthoud, John Arnold and Thomas Earnshaw then developed the detent escapement and the compensation balance that made chronometers practical to manufacture.
By the nineteenth century London, Liverpool, Le Locle and Glashütte supplied navies and merchant fleets. A typical box chronometer has a spring-detent escapement, a fusee to equalise mainspring torque, a bimetallic compensation balance with a helical balance spring, and is mounted in gimbals inside a wooden box so that it stays level.
What to look for
- Gimbals and a three-tier wooden box with a glazed inner lid.
- A power-reserve ('up and down') indicator on the dial, usually showing 56 hours on two-day instruments.
- Spring-detent escapement and a cylindrical (helical) balance spring visible through the movement.
- Admiralty or navy marks (broad arrow), and rating certificates from observatories.
- The maker's number on the dial and movement; many makers' registers survive, allowing dating.
Dating clues
- Earnshaw-type spring-detent chronometers became standard after about 1800.
- Auxiliary compensation devices on the balance appear from the mid-nineteenth century.
- Quartz and radio time signals ended routine use of mechanical chronometers in the 1970s and 1980s.
General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.
Read next:Spring detent (chronometer) escapementFuseeBalance spring (hairspring)Detent escapement
Related records
Instruments · c. 1969
Deck watch no. 4341 by International Watch Co
Royal Museums Greenwich
Instruments · 1925
Chronometer by Paul Ditisheim, 1925
Science Museum Group, London
Instruments · c. 1940
Longines marine chronometer, c. 1940
Antiquorum auction archive, Geneva
Instruments · c. 1920
Chronograph by Francillon und Cie (Longines), Switzerland, c. 1920
German Clock Museum
Instruments · c. 1943
Deck watch no. 121966 by Ulysse Nardin
Royal Museums Greenwich
Instruments · c. 1942
Deck watch no. 739 by Hamilton Watch Co
Royal Museums Greenwich
Instruments · c. 1943
Deck watch no. 121901 by Ulysse Nardin
Royal Museums Greenwich
Instruments · 1942
Marine chronometer no. 5674 by Hamilton Watch Co
Royal Museums Greenwich