
Clocks · Longcase clock
Justin Vulliamy George II Longcase Clock
- Maker / attribution
- Justin Vulliamy (source attribution)
- Date
- c. 1744
- Historical period
- Early Modern Horology (1600 – 1750)
- Country of origin
- England
- Object type
- Longcase clock
- Materials / technique
- Walnut veneered Oak
- Dimensions
- 218cm x 50cm x 25cm
- Holding institution
- W J Morris Clocks
- Accession / object no.
- justin-vulliamy-george-ii-longcase-clock-f284947f42
- Credit line
- W J Morris Clocks
- Catalogue title (original)
- Justin Vulliamy George II Longcase (English)
View the source record ↗ (opens another website in a new tab)Suggest a correction
Record summary
Held and catalogued by W J Morris Clocks (object number justin-vulliamy-george-ii-longcase-clock-f284947f42), this is a longcase clock attributed to Justin Vulliamy, made in England, dated c. 1744. The Atlas places it in the Early Modern Horology period (1600 – 1750) of its Clocks collection. Materials and techniques recorded by the source: Walnut veneered Oak. Recorded dimensions: 218cm x 50cm x 25cm. The record is illustrated with 1 photograph.
Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.
Catalogue description
Original object description
Attributed to King George II's clockmaker, Justin Vulliamy, and dating to approximately 1744, this eight-day longcase clock stands 218 cm tall, 50 cm wide, and 25 cm deep. The walnut-veneered oak housing features a flat-topped hood flanked by brass-detailed pillars; while the original trunk and hood locks and key are retained, the back board has undergone a matching like-for-like replacement. Visible through the trunk door are the weights and brass pendulum bob that run the five-pillar, key-wound movement, which utilizes a deadbeat escapement and a rack-striking system sounding hours upon a bell. The square brass dial is ornamented with foliate corner spandrels, blued steel hands, an outer minute band, Roman hour chapters on a silvered chapter ring, and a silvered subsidiary seconds dial, accompanied by an engraved name plaque bearing the text "Justin Vulliamy, London". The clock has previously been documented on display at the Dagfields Craft and Antiques centre situated in Nantwich, Cheshire.
Historical context
Early Modern Horology (1600 – 1750)
Huygens' pendulum and balance spring transform accuracy; English makers develop the anchor and deadbeat escapements.
Huygens's pendulum (1656–57) improved clock accuracy from about a quarter of an hour to under a minute a day. The anchor escapement (c. 1670) and the long seconds pendulum created the longcase clock; London makers such as Fromanteel, Knibb, Tompion and Quare led European clockmaking, and French makers created the Boulle pendule.
Read the period in the timelineMore clocks from this periodEarlier: Renaissance Horology
Atlas type guide
Longcase (tall-case or grandfather) clocks
The longcase clock was born from two seventeenth-century innovations: Christiaan Huygens's pendulum (1656–57) and the anchor escapement (c. 1670). A long seconds pendulum, nearly a metre long, swings with a small arc, and enclosing it together with the driving weights in a tall wooden case protected the mechanism and created a new piece of furniture. London makers such as Ahasuerus Fromanteel, Thomas Tompion and Joseph Knibb set the pattern.
By the eighteenth century longcase clocks were made throughout Britain, the Netherlands, Scandinavia (the Swedish Mora clock), France (the Comtoise from the Franche-Comté), Germany and colonial America. Eight-day movements with two weights became standard in better clocks; thirty-hour clocks with one weight and a rope or chain were cheaper alternatives.
What to look for
- Winding holes in the dial: two (eight-day, going and striking) or none (thirty-hour, pulled up by a chain).
- Brass dials with applied chapter rings (earlier) versus painted iron 'white' dials (after c. 1770 in Britain).
- Moon-phase arches, date apertures, seconds dials and maker's name on the dial.
- Case woods and style: ebonised, walnut marquetry, lacquer, oak or mahogany; regional styles from London, Lancashire, Scotland or America.
- Whether the movement and dial match the case — 'marriages' are common.
Dating clues
- Square brass dials suggest c. 1670–1720; arched brass dials c. 1715–1790.
- Painted (white) dials were made by Birmingham dial-makers from about 1772.
- Comtoise clocks with repoussé pendulums are mostly nineteenth century.
General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.
Related records
Clocks · c.1750
Longcase clock by Benjamin Gray, England, c.1750
Victoria and Albert Museum, London
Pocket Watches · 1778 (hallmarked London)
18th century cylinder gold pair cased pocket watch by Justin Vulliamy, London, hallmarked London 1778
Gardiner Houlgate (auction house), Corsham
Clocks · 1598–1603
Circular table-clock with calendrical and lunar indications made by Nicholas Vallin in London between 1598 and 1603.
Science Museum Group, London
Clocks · 1611
English iron lantern clock, with wheel balance, by John Holloway, Market Lavington, Wiltshire, England, 1611.
Science Museum Group, London
Clocks · 1630
Lantern clock by Francis Forman, England, 1630
Science Museum Group, London
Clocks · 1632–1640
Turret clock, England, 1632–1640
Science Museum Group, London
Clocks · 1645–1655
Balance-wheel brass lantern clock, with two driving weights and one counterweight, by Thomas Knifton, Cross Keys, Lothbury, London, England, 1645–1655.
Science Museum Group, London
Clocks · c. 1650
Lantern alarm clock, silver, by David Bouquet, circa 1650
Victoria and Albert Museum, London
