Skip to content

Clocks · Longcase clock

George Graham George I Burr Walnut Eight-Day Longcase Clock, No. 662

DocumentedDocumented from the holding institution's catalogue record.
Maker / attribution
George Graham (source attribution)
Date
c. 1725
Country of origin
England
Object type
Longcase clock
Holding institution
Dreweatts
Accession / object no.
236
Credit line
Dreweatts
Catalogue title (original)
Lot 236: Fine Clocks, Barometers and Scientific Instruments | 13 September 2023 | Dreweatts (English)

View the source record ↗ (opens another website in a new tab)Suggest a correction

Record summary

Held and catalogued by Dreweatts (object number 236), this is a longcase clock attributed to George Graham, made in England, dated c. 1725. The Atlas places it in the Early Modern Horology period (1600 – 1750) of its Clocks collection. The record is illustrated with 1 photograph.

Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.

Catalogue description

Original object description

Dating to roughly 1725, this George I eight-day longcase clock is the work of George Graham and bears number 662. The two-train mechanism strikes on a bell and relies on five knopped, latched pillars, an inverted Y-pallet deadbeat escapement, bolt-and-shutter maintaining power on the time train, and a seconds-beating pendulum fitted with a brass rod, index pointer, calibrated rating nut, and lenticular bob. Its 12-inch square brass dial displays a matted center with an oval plaque reading 'Geo: Graham, London', accompanied by an applied silvered chapter ring with Roman numerals, a subsidiary seconds dial, and double-screwed gilt-brass spandrels exhibiting foliate borders, scrollwork, and Indian masks. Clothed in burr walnut veneers, the case is capped by an ogee cornice, a low platform carrying a domed caddy top, fretwork along the frieze and hood sides, and three-quarter hood columns with gilt-brass capitals. The 40-inch trunk door presents herringbone inlays, book-matched panels, and cross-grain cavetto moldings, with matching cavetto details along the base. Number 662 is punch-marked onto the upper left edge of the door and the lower rear plate of the movement, while the interior preserves the remains of a paper equation table along with an ivorine plaque marked 'CAMERER CUSS'. The clock previously belonged to a financial institution located in central London.

Inscriptions & marks

662

Historical context

Early Modern Horology (1600 – 1750)

Huygens' pendulum and balance spring transform accuracy; English makers develop the anchor and deadbeat escapements.

Huygens's pendulum (1656–57) improved clock accuracy from about a quarter of an hour to under a minute a day. The anchor escapement (c. 1670) and the long seconds pendulum created the longcase clock; London makers such as Fromanteel, Knibb, Tompion and Quare led European clockmaking, and French makers created the Boulle pendule.

Read the period in the timelineMore clocks from this periodEarlier: Renaissance Horology

Atlas type guide

Longcase (tall-case or grandfather) clocks

The longcase clock was born from two seventeenth-century innovations: Christiaan Huygens's pendulum (1656–57) and the anchor escapement (c. 1670). A long seconds pendulum, nearly a metre long, swings with a small arc, and enclosing it together with the driving weights in a tall wooden case protected the mechanism and created a new piece of furniture. London makers such as Ahasuerus Fromanteel, Thomas Tompion and Joseph Knibb set the pattern.

By the eighteenth century longcase clocks were made throughout Britain, the Netherlands, Scandinavia (the Swedish Mora clock), France (the Comtoise from the Franche-Comté), Germany and colonial America. Eight-day movements with two weights became standard in better clocks; thirty-hour clocks with one weight and a rope or chain were cheaper alternatives.

What to look for

  • Winding holes in the dial: two (eight-day, going and striking) or none (thirty-hour, pulled up by a chain).
  • Brass dials with applied chapter rings (earlier) versus painted iron 'white' dials (after c. 1770 in Britain).
  • Moon-phase arches, date apertures, seconds dials and maker's name on the dial.
  • Case woods and style: ebonised, walnut marquetry, lacquer, oak or mahogany; regional styles from London, Lancashire, Scotland or America.
  • Whether the movement and dial match the case — 'marriages' are common.

Dating clues

  • Square brass dials suggest c. 1670–1720; arched brass dials c. 1715–1790.
  • Painted (white) dials were made by Birmingham dial-makers from about 1772.
  • Comtoise clocks with repoussé pendulums are mostly nineteenth century.

General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.

Read next:Anchor (recoil) escapementAnchor escapement

Related records