Skip to content

Instruments · Two-day marine chronometer

Charles Frodsham Two-Day Marine Chronometer No. 2819

DocumentedDocumented from the holding institution's catalogue record.
Maker / attribution
Charles Frodsham (source attribution)
Date
c. 1860
Country of origin
England
Object type
Two-day marine chronometer
Holding institution
1stDibs
Accession / object no.
f_37964832
Credit line
1stDibs
Catalogue title (original)
Fine Two-Day Marine Chronometer Signed Charles Frodsham at 1stDibs (English)

View the source record ↗ (opens another website in a new tab)Suggest a correction

Record summary

Held and catalogued by 1stDibs (object number f_37964832), this is a two-day marine chronometer attributed to Charles Frodsham, made in England, dated c. 1860. The Atlas places it in the Industrial Revolution period (1850 – 1900) of its Instruments collection. The record is illustrated with 1 photograph.

Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.

Catalogue description

Original object description

Constructed in England circa 1860 by Charles Frodsham, this two-day marine chronometer (No. 2819) sits in a gimballed brass bowl within a brass-bound three-tier rosewood housing, accompanied by an outer leather-strapped transport case. The lower section of the main box features drop handles and an inlaid brass lock escutcheon, while an inlaid bone medallion on the upper front tier states the maker's name and serial number. A brass push-button secures the top lid above a glass viewing window, and a lower-right transit catch locks the gimballed bowl in place. A spring-loaded circular flap shields the winding hole, which receives a dedicated directional ratchet key stored in an upper-right corner well. The four-inch silvered dial features Roman hour numerals, single- and five-minute divisions, gilt brass hands, an up-and-down power reserve gauge scaled from 0 to 56 hours under XII, and a subsidiary seconds ring over VI marked with single, five-, and ten-second Arabic intervals tracked by a blued-steel hand. Both the dial and an exterior circular plaque carry the serial number 2819, the maker's name, and the address 84 Strand, London. The silvered inner bezel bears the engraved inscription 'EXPOSITION UNIVERSELLE DE 1855 GRANDE MEDAILLE D’HONNEUR'. Driven by a spring barrel and chain fusee between round brass plates, the 48-hour movement is regulated by an Earnshaw spring detent escapement, a helical balance spring, and a temperature-compensated balance.

Inscriptions & marks

2819

Historical context

Industrial Revolution (1850 – 1900)

American interchangeable-parts manufacture; railroad time standards; Swiss and German factory systems.

Instruments spread into industry, science and sport: stopwatches, chronoscopes, metronomes, watchmen's clocks and time recorders.

Read the period in the timelineMore instruments from this periodEarlier: Precision & Scientific Horology

Atlas type guide

Marine chronometers

A marine chronometer is a precision timekeeper carried at sea to find longitude: the navigator compares local noon, observed with a sextant, with the time at a reference meridian kept by the chronometer. Each hour of difference corresponds to fifteen degrees of longitude. John Harrison proved the method in the 1760s; Pierre Le Roy, Ferdinand Berthoud, John Arnold and Thomas Earnshaw then developed the detent escapement and the compensation balance that made chronometers practical to manufacture.

By the nineteenth century London, Liverpool, Le Locle and Glashütte supplied navies and merchant fleets. A typical box chronometer has a spring-detent escapement, a fusee to equalise mainspring torque, a bimetallic compensation balance with a helical balance spring, and is mounted in gimbals inside a wooden box so that it stays level.

What to look for

  • Gimbals and a three-tier wooden box with a glazed inner lid.
  • A power-reserve ('up and down') indicator on the dial, usually showing 56 hours on two-day instruments.
  • Spring-detent escapement and a cylindrical (helical) balance spring visible through the movement.
  • Admiralty or navy marks (broad arrow), and rating certificates from observatories.
  • The maker's number on the dial and movement; many makers' registers survive, allowing dating.

Dating clues

  • Earnshaw-type spring-detent chronometers became standard after about 1800.
  • Auxiliary compensation devices on the balance appear from the mid-nineteenth century.
  • Quartz and radio time signals ended routine use of mechanical chronometers in the 1970s and 1980s.

General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.

Read next:Balance spring (hairspring)Detent escapement

Related records