Skip to content

Pocket Watches · Pair cased pocket watch

Bordier ' Montre a Portrait

DocumentedDocumented from the holding institution's catalogue record.
Maker / attribution
Bordier (source attribution)
Date
c. 1780
Country of origin
Geneva
Object type
Pair cased pocket watch
Materials / technique
Gilt brass
Holding institution
Antiquorum
Accession / object no.
289
Credit line
Antiquorum
Catalogue title (original)
Bordier ' Montre a Portrait\nBordier a Genève, No. 38117. Made circa 1780.\nFine and rare, gilt brass and painted on enamel, paste-set, pair-cased pocket watch.\nTo be sold without reserve (English)

View the source record ↗ (opens another website in a new tab)Suggest a correction

Record summary

Held and catalogued by Antiquorum (object number 289), this is a pair cased pocket watch attributed to Bordier, made in Geneva, dated c. 1780. The Atlas places it in the Precision & Scientific Horology period (1750 – 1850) of its Pocket Watches collection. Materials and techniques recorded by the source: Gilt brass. The record is illustrated with 1 photograph.

Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.

Catalogue description

Original object description

Made around 1780 by the Geneva-based watchmaker Bordier, this pair-cased pocket watch measures 39 mm and bears number 38117. Its outer gilt-brass case is ornamented with a painted enamel portrait medallion of a woman on the reverse, bordered by paste jewels and translucent imperial blue enamel applied over engine turning. An engraved repeating motif accents the case band, matched by a gem-lined front bezel. Nestled inside is a polished gilt-brass inner case of deep bassine profile. The mechanism consists of a 28 mm full-plate gilt movement fitted with a fusee and chain, verge escapement, and a brass balance.

Case and Exterior Decoration

The outer two-part gilt-brass shell displays an enamel medallion of a female figure centered on its rear. This portrait is bordered by paste gems and an outer ring of transparent imperial blue enamel over concentric guilloché engraving. The exterior band is chased with a continuous pattern, while paste gems surround the crystal bezel. Inside rests a deep-bottomed, two-piece polished bassine case. The outer assembly spans 39 mm in diameter and shows light surface scratching alongside minor chips in the enamel.

Movement and Technical Features

Secured to the inner case by a hinge, the 28 mm movement is built on frosted gilt full plates held apart by baluster-form pentagonal pillars. The mechanism utilizes a chain fusee, a verge escapement, a plain brass balance, and a flat hairspring. A single-footed balance cock supports a central ruby-paste endstone.

Dial and Signatures

The white enamel dial displays radial Roman numerals for the hours and an outer circle marked with five-minute Arabic intervals. Elaborate paste-set hands display the time. Bordier of Geneva is signed on both the dial and the movement.

Inscriptions & marks

38117

Historical context

Precision & Scientific Horology (1750 – 1850)

Harrison solves longitude; Mudge invents the lever; Breguet's Paris workshop defines the modern watch.

From 1750 to 1850 the watch became a precision instrument. Mudge's lever escapement, the cylinder escapement, Lépine's thin bar calibre, Breguet's innovations (overcoil, tourbillon, perpétuelle) and the pocket chronometer of Arnold and Earnshaw all date from this period, while verge watches remained common in cheaper production.

Read the period in the timelineMore pocket watches from this periodEarlier: Early Modern Horology

Atlas type guide

Verge and pair-cased watches

After Christiaan Huygens and Robert Hooke applied the balance spring around 1675, the verge watch became a reasonably reliable timekeeper and the minute hand became standard. Through the eighteenth century the typical English watch was a pair-cased verge: a fusee movement with a pierced, engraved balance cock, housed in an inner case and a separate protective outer case, often of repoussé gold, shagreen, tortoiseshell or enamel.

French watches of the same period were thicker 'oignons', later replaced by elegant thinner watches following Jean-Antoine Lépine's bar-bridge calibre of c. 1770. Dutch, Swiss and German makers supplied international markets, and verge watches were made until the mid-nineteenth century as cheaper alternatives to the cylinder and lever.

What to look for

  • The pierced balance cock on the backplate: winged (continental) or with a foot (English); its style dates the watch.
  • Fusee and chain visible through the movement; key winding through the dial (early) or case back.
  • Hallmarks inside English silver or gold cases, which give a date letter.
  • Maker's name and serial number engraved on the backplate; watch papers inside outer cases.
  • Enamel dials (after c. 1720) versus earlier champlevé metal dials.

Dating clues

  • Champlevé dials: c. 1680–1730; white enamel dials thereafter.
  • English case hallmarks give the year of assay to within a year.
  • Verge watches persisted in cheap production until c. 1850.

General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.

Read next:Verge escapement

Related records