Skip to content

Pocket Watches · Pair-cased pocket watch

A Fine George III Gold Pair-Cased Pocket Watch with Cylinder Escapement

DocumentedDocumented from an auction catalogue; attribution as stated by the auction house.
Maker / attribution
Thomas Mudge and William Dutton (source attribution)
Date
1781
Country of origin
England
Object type
Pair-cased pocket watch
Auction house
Dreweatts
Lot
225
Credit line
Dreweatts
Catalogue title (original)
A FINE GEORGE III GOLD PAIR-CASED POCKET WATCH WITH CYLINDER ESCAPEMENT (English)

View the source record (auction lot) ↗ (opens another website in a new tab)Suggest a correction

Record summary

Catalogued by Dreweatts (lot 225), this is a pair-cased pocket watch attributed to Thomas Mudge and William Dutton, made in England, dated 1781. The Atlas places it in the Precision & Scientific Horology period (1750 – 1850) of its Pocket Watches collection. The record is illustrated with 1 photograph.

Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.

Catalogue description

Original object description

This George III gold pair-cased pocket watch features London hallmarks from 1781 and is catalogued as an creation of Thomas Mudge and William Dutton. Both the inner case and the 5 cm outer cover bear the maker's punch 'I T P' for John Terrill Pain of Fetter Lane; the exterior shell is decorated with an armorial device showing a hand holding a crescent above an oval cartouche with the monogram 'R H'. The inner case retains a rounded glass bezel, top suspension ring, and stem at twelve o'clock. Its slightly convex white enamel dial is fitted with gold poker and beetle hands, an outer Arabic minute ring, and Roman hour markers, showing a minute surface indentation near the XI marker under oblique illumination. Supported by four baluster pillars of square cross-section pinned to the rear, the gilt full-plate single fusee movement employs a cylinder escapement, a steel three-arm balance with spring, and a Tompion regulator. Its pierced balance cock, embellished with grotesque mask carving, asymmetric scrollwork, and herringbone borders, is engraved with the signature and movement number 1207, which is likewise repeated on the gilt-brass dust cap. Auction records indicate the cylinder escape wheel is a later replacement.

Inscriptions & marks

1207

Historical context

Precision & Scientific Horology (1750 – 1850)

Harrison solves longitude; Mudge invents the lever; Breguet's Paris workshop defines the modern watch.

From 1750 to 1850 the watch became a precision instrument. Mudge's lever escapement, the cylinder escapement, Lépine's thin bar calibre, Breguet's innovations (overcoil, tourbillon, perpétuelle) and the pocket chronometer of Arnold and Earnshaw all date from this period, while verge watches remained common in cheaper production.

Read the period in the timelineMore pocket watches from this periodEarlier: Early Modern Horology

Atlas type guide

Verge and pair-cased watches

After Christiaan Huygens and Robert Hooke applied the balance spring around 1675, the verge watch became a reasonably reliable timekeeper and the minute hand became standard. Through the eighteenth century the typical English watch was a pair-cased verge: a fusee movement with a pierced, engraved balance cock, housed in an inner case and a separate protective outer case, often of repoussé gold, shagreen, tortoiseshell or enamel.

French watches of the same period were thicker 'oignons', later replaced by elegant thinner watches following Jean-Antoine Lépine's bar-bridge calibre of c. 1770. Dutch, Swiss and German makers supplied international markets, and verge watches were made until the mid-nineteenth century as cheaper alternatives to the cylinder and lever.

What to look for

  • The pierced balance cock on the backplate: winged (continental) or with a foot (English); its style dates the watch.
  • Fusee and chain visible through the movement; key winding through the dial (early) or case back.
  • Hallmarks inside English silver or gold cases, which give a date letter.
  • Maker's name and serial number engraved on the backplate; watch papers inside outer cases.
  • Enamel dials (after c. 1720) versus earlier champlevé metal dials.

Dating clues

  • Champlevé dials: c. 1680–1730; white enamel dials thereafter.
  • English case hallmarks give the year of assay to within a year.
  • Verge watches persisted in cheap production until c. 1850.

General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.

Read next:Verge escapementBalance spring (hairspring)Verge escapement

Related records