
Instruments · 2-day marine chronometer
Parkinson and Frodsham 2-day marine chronometer No. 1769
- Maker / attribution
- Parkinson and Frodsham (source attribution)
- Date
- c. 1820
- Historical period
- Precision & Scientific Horology (1750 – 1850)
- Country of origin
- England
- Object type
- 2-day marine chronometer
- Dimensions
- Height 17cm, Width 15cm, Depth 15cm
- Holding institution
- Hansord Antiques
- Accession / object no.
- SA1132958
- Credit line
- Hansord Antiques
- Catalogue title (original)
- A Fine Early 19th Century Marine Chronometer by Parkinson and Frodsham | Sellingantiques.co.uk (English)
View the source record ↗ (opens another website in a new tab)Suggest a correction
Record summary
Held and catalogued by Hansord Antiques (object number SA1132958), this is a 2-day marine chronometer attributed to Parkinson and Frodsham, made in England, dated c. 1820. The Atlas places it in the Precision & Scientific Horology period (1750 – 1850) of its Instruments collection. Recorded dimensions: Height 17cm, Width 15cm, Depth 15cm. The record is illustrated with 1 photograph.
Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.
Catalogue description
Original object description
Dating from around 1820, this two-day English marine chronometer is signed by the London partnership Parkinson and Frodsham and designated with serial number 1769, visible both on its silvered dial and on an applied exterior plaque. The 8 cm dial is laid out with blued steel hands, Roman numerals, and a dedicated subsidiary seconds display, mounted in gimbals inside a three-tiered mahogany transport box lined with green felt, finished with brass corner protectors, drop handles on the sides, and a front keyhole. An original tipsy-style key is included. Detailed in dealer documentation—though obscured from view in open-case photographs—the chain-fusee movement incorporates ring-turned cylindrical pillars, an Earnshaw spring detent escapement, a sprung internal dust cap, a blued steel balance spring, and a bimetallic compensation balance equipped with a diamond endstone.
Inscriptions & marks
1769
Historical context
Precision & Scientific Horology (1750 – 1850)
Harrison solves longitude; Mudge invents the lever; Breguet's Paris workshop defines the modern watch.
The longitude problem was solved by the marine chronometer and lunar distance methods; dividing engines made precision scales possible, and observatories set time by transit instruments.
Read the period in the timelineMore instruments from this periodEarlier: Early Modern Horology
Atlas type guide
Marine chronometers
A marine chronometer is a precision timekeeper carried at sea to find longitude: the navigator compares local noon, observed with a sextant, with the time at a reference meridian kept by the chronometer. Each hour of difference corresponds to fifteen degrees of longitude. John Harrison proved the method in the 1760s; Pierre Le Roy, Ferdinand Berthoud, John Arnold and Thomas Earnshaw then developed the detent escapement and the compensation balance that made chronometers practical to manufacture.
By the nineteenth century London, Liverpool, Le Locle and Glashütte supplied navies and merchant fleets. A typical box chronometer has a spring-detent escapement, a fusee to equalise mainspring torque, a bimetallic compensation balance with a helical balance spring, and is mounted in gimbals inside a wooden box so that it stays level.
What to look for
- Gimbals and a three-tier wooden box with a glazed inner lid.
- A power-reserve ('up and down') indicator on the dial, usually showing 56 hours on two-day instruments.
- Spring-detent escapement and a cylindrical (helical) balance spring visible through the movement.
- Admiralty or navy marks (broad arrow), and rating certificates from observatories.
- The maker's number on the dial and movement; many makers' registers survive, allowing dating.
Dating clues
- Earnshaw-type spring-detent chronometers became standard after about 1800.
- Auxiliary compensation devices on the balance appear from the mid-nineteenth century.
- Quartz and radio time signals ended routine use of mechanical chronometers in the 1970s and 1980s.
General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.
Read next:Detent escapement
Related records
Instruments · 1731–1776
Azimuth compass sundial by James Ferguson, London, England, 1731–1776. Could also be used as a tablet sundial - string gnomon is missing (see note).
Science Museum Group, London
Instruments · 1738–1777
Azimuth sundial 4 3/8" diam, with folding gnomon fitted in mahogany case, made by B. Martin
Science Museum Group, London
Instruments · 1750–1800
Single sand glass in four pillared wooden mount. 17 minutes. Horne Type B. Second half of the 18th century
Science Museum Group, London
Instruments · 1751–1825
Sundial, by Troughton, in case. Invented and made by Troughton
Science Museum Group, London
Instruments · 1751–1850
Universal Sundial; by Dollond and large brass stand, engraved "Dollond London" 6-inch hours circle, divided to 2 min, 3 levelling screws
Science Museum Group, London
Instruments · 1760–1769
Armillary / astronomical instrument by John Bird, England, 1760–1769
Science Museum Group, London
Instruments · 1763–1829
Chronometer watch by Thomas Earnshaw No.498, with later barrel cover numbered 2829, balance cock and regulator. In 18 ct. gold case hallmarked 1807/8
Science Museum Group, London
Instruments · 1770
Marine timekeeper 'H5' by John Harrison and Son, England, 1770
Science Museum Group, London
