
Pocket Watches · Pair cased verge pocket watch
Lowrie & Northey English silver pair cased verge pocket watch
- Maker / attribution
- Lowrie & Northey (source attribution)
- Date
- 1799
- Historical period
- Precision & Scientific Horology (1750 – 1850)
- Country of origin
- England
- Object type
- Pair cased verge pocket watch
- Dimensions
- 51mm wide x 25mm high including glass
- Holding institution
- Atlam Watches
- Accession / object no.
- 4.325 (AB-299991)
- Credit line
- Atlam Watches
- Catalogue title (original)
- English silver pair cased verge, owners dated dial. Lowrie & Northey, Stoke Newington 1799 in Antique Mens Watches (English)
View the source record ↗ (opens another website in a new tab)Suggest a correction
Record summary
Held and catalogued by Atlam Watches (object number 4.325 (AB-299991)), this is a pair cased verge pocket watch attributed to Lowrie & Northey, made in England, dated 1799. The Atlas places it in the Precision & Scientific Horology period (1750 – 1850) of its Pocket Watches collection. Recorded dimensions: 51mm wide x 25mm high including glass. The record is illustrated with 1 photograph.
Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.
Catalogue description
Original object description
This English pair-cased verge pocket watch features unornamented inner and outer silver cases bearing London hallmarking for 1799. Preserving its original pendant stem and ring bow, it spans 51 mm across and 25 mm through its mineral bull's-eye crystal. Key winding is accessed via the rear, while hands are adjusted from the dial side. The white enamel dial is adorned with gold hands, the date '1799', and the name 'THO.S STORER' (alternatively cited as 'Tho’s Storer, London, 1799'), presumed to identify the original purchaser. The internal full-plate gilt fusee mechanism is inscribed 'Lowrie & Northey, Stoke Newington 3079' and showcases an openwork balance cock engraved with a grotesque mask. Documented defects include two hairline fractures near 3 o'clock on the dial and a lost push-dome from the extant outer case latch. According to the seller, the mechanism loses roughly 45 minutes over twenty-four hours and remains fragile, necessitating particular caution with the fusee chain during use.
Inscriptions & marks
3079
Historical context
Precision & Scientific Horology (1750 – 1850)
Harrison solves longitude; Mudge invents the lever; Breguet's Paris workshop defines the modern watch.
From 1750 to 1850 the watch became a precision instrument. Mudge's lever escapement, the cylinder escapement, Lépine's thin bar calibre, Breguet's innovations (overcoil, tourbillon, perpétuelle) and the pocket chronometer of Arnold and Earnshaw all date from this period, while verge watches remained common in cheaper production.
Read the period in the timelineMore pocket watches from this periodEarlier: Early Modern Horology
Atlas type guide
Verge and pair-cased watches
After Christiaan Huygens and Robert Hooke applied the balance spring around 1675, the verge watch became a reasonably reliable timekeeper and the minute hand became standard. Through the eighteenth century the typical English watch was a pair-cased verge: a fusee movement with a pierced, engraved balance cock, housed in an inner case and a separate protective outer case, often of repoussé gold, shagreen, tortoiseshell or enamel.
French watches of the same period were thicker 'oignons', later replaced by elegant thinner watches following Jean-Antoine Lépine's bar-bridge calibre of c. 1770. Dutch, Swiss and German makers supplied international markets, and verge watches were made until the mid-nineteenth century as cheaper alternatives to the cylinder and lever.
What to look for
- The pierced balance cock on the backplate: winged (continental) or with a foot (English); its style dates the watch.
- Fusee and chain visible through the movement; key winding through the dial (early) or case back.
- Hallmarks inside English silver or gold cases, which give a date letter.
- Maker's name and serial number engraved on the backplate; watch papers inside outer cases.
- Enamel dials (after c. 1720) versus earlier champlevé metal dials.
Dating clues
- Champlevé dials: c. 1680–1730; white enamel dials thereafter.
- English case hallmarks give the year of assay to within a year.
- Verge watches persisted in cheap production until c. 1850.
General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.
Related records
Pocket Watches · c. 1740–60
Watch by Charles Cabrier II, England, c. 1740–60 (The Met 17.190.1458)
The Metropolitan Museum of Art, New York
Pocket Watches · c. 1740–60
Watch by Charles Cabrier II, England, c. 1740–60 (The Met 17.190.1461)
The Metropolitan Museum of Art, New York
Pocket Watches · c. 1751–52
Watch by John Rich, England, c. 1751–52
The Metropolitan Museum of Art, New York
Pocket Watches · c. 1753
Gold watch, signed 'Jno. Ellicott, London, 3719', the inner case pierced and engraved, with a casemaker's mark 'JB', London, about 1753
Victoria and Albert Museum, London
Pocket Watches · 1750–1810
Astronomical watch by George Margetts No.3043 in pair case, 1750–1810
Science Museum Group, London
Pocket Watches · 1750–1775
Watch made for the Turkish market
Victoria and Albert Museum, London
Pocket Watches · c. 1760
Clock-watch by Sr. Joseph Martineau, England, c. 1760
The Metropolitan Museum of Art, New York
Pocket Watches · c. 1760
Watch by John Ellicott, England, c. 1760
The Metropolitan Museum of Art, New York
