Skip to content

Pocket Watches · Quarter-repeating pendant watch

Henry Quarter-Repeating à Toc Pendant Watch

DocumentedDocumented from the holding institution's catalogue record.
Maker / attribution
Henry (source attribution)
Date
c. 1790
Country of origin
Paris
Object type
Quarter-repeating pendant watch
Holding institution
Antiquorum
Accession / object no.
242
Credit line
Antiquorum
Catalogue title (original)
Henry, Quarter-Repeating\nà Toc\nHenry a Paris, No. 1787. Made circa\n1790.\nFine, quarter-repeating à toc, gold,\nenamel and pearl-set pendant watch.\nAccompanied by a gold and enamel\nshort chain an (English)

View the source record ↗ (opens another website in a new tab)Suggest a correction

Record summary

Held and catalogued by Antiquorum (object number 242), this is a quarter-repeating pendant watch attributed to Henry, made in Paris, dated c. 1790. The Atlas places it in the Precision & Scientific Horology period (1750 – 1850) of its Pocket Watches collection. The record is illustrated with 1 photograph.

Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.

Catalogue description

Original object description

Bearing movement number 1787 and attributed to Henry of Paris circa 1790, this gold pendant watch is fitted with an à toc quarter-repeating mechanism. The two-body gold case conceals its hinge to preserve an uninterrupted profile, displaying a rear panel decorated with gold paillons over royal blue translucent guilloché enamel and encircled by a pearl-set border that corresponds to the front bezel. The watch is accompanied by an enameled and pearl-embellished gold suspension chain of short length, alongside an enamel, gold, and pearl winding key featuring a diamond profile. The silver dial presents an engine-turned center surrounded by painted radial Roman numerals and an outer minute track; its surface shows oxidation and is noted to be in fair condition, with later-substituted gold Breguet hands. Accessing the interior via the case hinge reveals a 31 mm matte gilt caliber framed by conical pillars and driven by a fusee and chain. Timekeeping is governed by a cylinder escapement and a three-arm balance wheel with a flat hairspring, positioned under a pierced and engraved continental balance cock bearing a polished steel endplate. Quarter strikes are sounded à toc via a pair of side-mounted polished steel hammers that impact the interior of the case directly rather than striking gongs. Auction cataloguing indicates that the escapement is a subsequent replacement that currently requires repair.

Inscriptions & marks

1787

Historical context

Precision & Scientific Horology (1750 – 1850)

Harrison solves longitude; Mudge invents the lever; Breguet's Paris workshop defines the modern watch.

From 1750 to 1850 the watch became a precision instrument. Mudge's lever escapement, the cylinder escapement, Lépine's thin bar calibre, Breguet's innovations (overcoil, tourbillon, perpétuelle) and the pocket chronometer of Arnold and Earnshaw all date from this period, while verge watches remained common in cheaper production.

Read the period in the timelineMore pocket watches from this periodEarlier: Early Modern Horology

Atlas type guide

Early spring-driven watches

Portable spring-driven timepieces appeared in southern Germany, France and Italy in the early sixteenth century; Peter Henlein of Nuremberg is traditionally credited, although the historical record is complex. These early watches were worn as pendants or carried, had iron or brass movements with a verge escapement and a foliot or small balance, and used a stackfreed or fusee to equalise spring force. They indicated hours only and were notoriously inaccurate.

From the later sixteenth century watches were made in Blois, Paris, Geneva, London and Augsburg in oval, octagonal, cruciform, skull and other 'form' cases of rock crystal, gilt brass, silver and enamel. They were jewellery and status objects as much as timekeepers.

What to look for

  • A single hour hand and often a touch-pin hour ring for feeling the time.
  • Stackfreed (a cam and spring) instead of a fusee on German watches.
  • Pierced and engraved cocks over the balance, fine gut fusee lines.
  • Rock-crystal, enamelled or engraved form cases.

Dating clues

  • Drum-shaped German watches: c. 1530–1580.
  • Oval and form watches: c. 1580–1650.
  • Before c. 1675 there is no balance spring; watches can vary by many minutes a day.

General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.

Read next:Verge escapementFoliotThe Melanchthon watch

Related records