
Clocks · Longcase clock
Edward East Walnut Longcase Clock
- Maker / attribution
- Edward East (source attribution)
- Date
- third quarter of the 17th century
- Historical period
- Early Modern Horology (1600 – 1750)
- Country of origin
- England
- Object type
- Longcase clock
- Dimensions
- 198 cm
- Holding institution
- Bonhams / Invaluable
- Accession / object no.
- 201086677
- Credit line
- Bonhams / Invaluable
- Catalogue title (original)
- Edward East walnut longcase clock (English)
View the source record ↗ (opens another website in a new tab)Suggest a correction
Record summary
Held and catalogued by Bonhams / Invaluable (object number 201086677), this is a longcase clock attributed to Edward East, made in England, dated third quarter of the 17th century. The Atlas places it in the Early Modern Horology period (1600 – 1750) of its Clocks collection. Recorded dimensions: 198 cm. The record is illustrated with 1 photograph.
Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.
Catalogue description
Original object description
Standing 198 cm in height, this walnut longcase clock dates to the third quarter of the 17th century and is attributed to the London clockmaker Edward East. Its architectural case is composed of a flat-topped hood with a pierced fret for sound emission and flanking spiral-turned pillars above a convex throat moulding, leading down to a trunk door with a later brass escutcheon and a large circular glass lenticle revealing the pendulum, all terminating on a moulded base with a shallow plinth. The 10-inch brass square dial displays floral spandrels at the corners, an engraved centre featuring tulips and still-life decoration, an Edward East signature above the 12 o'clock position, a subsidiary seconds ring, and an aperture for the calendar; its silvered chapter ring presents Roman numerals for the hours, fleur-de-lys half-hour markers, and Arabic five-minute indications. Driving the clock is a substantial three-train movement built with split plates secured by eleven latched, knopped pillars; it utilizes an escapement modified to an anchor configuration, alongside two external countwheels governing a quarter-striking sequence across six bells and an hour strike sounded on a separate bell mounted above.
Historical context
Early Modern Horology (1600 – 1750)
Huygens' pendulum and balance spring transform accuracy; English makers develop the anchor and deadbeat escapements.
Huygens's pendulum (1656–57) improved clock accuracy from about a quarter of an hour to under a minute a day. The anchor escapement (c. 1670) and the long seconds pendulum created the longcase clock; London makers such as Fromanteel, Knibb, Tompion and Quare led European clockmaking, and French makers created the Boulle pendule.
Read the period in the timelineMore clocks from this periodEarlier: Renaissance Horology
Atlas type guide
Longcase (tall-case or grandfather) clocks
The longcase clock was born from two seventeenth-century innovations: Christiaan Huygens's pendulum (1656–57) and the anchor escapement (c. 1670). A long seconds pendulum, nearly a metre long, swings with a small arc, and enclosing it together with the driving weights in a tall wooden case protected the mechanism and created a new piece of furniture. London makers such as Ahasuerus Fromanteel, Thomas Tompion and Joseph Knibb set the pattern.
By the eighteenth century longcase clocks were made throughout Britain, the Netherlands, Scandinavia (the Swedish Mora clock), France (the Comtoise from the Franche-Comté), Germany and colonial America. Eight-day movements with two weights became standard in better clocks; thirty-hour clocks with one weight and a rope or chain were cheaper alternatives.
What to look for
- Winding holes in the dial: two (eight-day, going and striking) or none (thirty-hour, pulled up by a chain).
- Brass dials with applied chapter rings (earlier) versus painted iron 'white' dials (after c. 1770 in Britain).
- Moon-phase arches, date apertures, seconds dials and maker's name on the dial.
- Case woods and style: ebonised, walnut marquetry, lacquer, oak or mahogany; regional styles from London, Lancashire, Scotland or America.
- Whether the movement and dial match the case — 'marriages' are common.
Dating clues
- Square brass dials suggest c. 1670–1720; arched brass dials c. 1715–1790.
- Painted (white) dials were made by Birmingham dial-makers from about 1772.
- Comtoise clocks with repoussé pendulums are mostly nineteenth century.
General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.
Read next:Anchor (recoil) escapementDeadbeat escapementAnchor escapement
Related records
Clocks · c. 1665
Table or bracket clock by Edward East, England, c. 1665
The Metropolitan Museum of Art, New York
Movements & Components · 1640–1660
Watch movement by Edward East, England, 1640–1660
Science Museum Group, London
Pocket Watches · c. 1635
Jewellery, England
Victoria and Albert Museum, London
Pocket Watches · c. 1640
Watch by Edward East, England, c. 1640
The Metropolitan Museum of Art, New York
Clocks · 1598–1603
Circular table-clock with calendrical and lunar indications made by Nicholas Vallin in London between 1598 and 1603.
Science Museum Group, London
Clocks · 1611
English iron lantern clock, with wheel balance, by John Holloway, Market Lavington, Wiltshire, England, 1611.
Science Museum Group, London
Clocks · 1630
Lantern clock by Francis Forman, England, 1630
Science Museum Group, London
Clocks · 1632–1640
Turret clock, England, 1632–1640
Science Museum Group, London
