
Instruments · Hunting case pocket lever chronometer
A. Lange & Söhne Anchor Chronometer
- Maker / attribution
- A. Lange & Söhne (source attribution)
- Date
- c. 1890
- Historical period
- Industrial Revolution (1850 – 1900)
- Country of origin
- Germany
- Object type
- Hunting case pocket lever chronometer
- Dimensions
- 55 mm
- Holding institution
- Antiquorum
- Accession / object no.
- 324
- Credit line
- Antiquorum
- Catalogue title (original)
- A. LANGE & SÖHNE, GERMANY, ANCHOR CHRONOMETER, GLASHÜTTE-SA, DEUTSCHE UHRENFABRIKATION, 18K YELLOW GOLD (English)
View the source record ↗ (opens another website in a new tab)Suggest a correction
Record summary
Held and catalogued by Antiquorum (object number 324), this is a hunting case pocket lever chronometer attributed to A. Lange & Söhne, made in Germany, dated c. 1890. The Atlas places it in the Industrial Revolution period (1850 – 1900) of its Instruments collection. Recorded dimensions: 55 mm. The record is illustrated with 1 photograph.
Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.
Catalogue description
Original object description
Dating to circa 1890, this heavy manual-wind anchor pocket chronometer by A. Lange & Söhne is set in a 55 mm 18k yellow gold hunting case, showing minor surface scratches in auction notes. The white enamel dial is shielded beneath the cover and exhibits bold black Arabic numerals, an exterior minute track, gold Louis XV hands, and a subsidiary seconds subdial at 6 o'clock. Powering the watch is a frosted gilt 19''' Glashütte 3/4-plate caliber featuring 25 jewels, a diamond endstone, and screwed gold chatons secured with blued steel screws. Its straight-line Glashütte escapement utilizes an escape wheel and pallet fork made of gold, functioning alongside a Lange Guillaume-type balance with gold screws and a blued steel Breguet balance spring. The hand-engraved balance cock is fitted with a swan-neck spring and an index regulator with a micrometric screw. The movement, dial, and case all bear signatures, and the piece retains its original fitted case and hang tag. Auction cataloguers gave it an overall condition grade of 'AA' (very good) while advising that the movement undergo a mechanical overhaul.
Inscriptions & marks
61509
Historical context
Industrial Revolution (1850 – 1900)
American interchangeable-parts manufacture; railroad time standards; Swiss and German factory systems.
Instruments spread into industry, science and sport: stopwatches, chronoscopes, metronomes, watchmen's clocks and time recorders.
Read the period in the timelineMore instruments from this periodEarlier: Precision & Scientific Horology
Atlas type guide
Marine chronometers
A marine chronometer is a precision timekeeper carried at sea to find longitude: the navigator compares local noon, observed with a sextant, with the time at a reference meridian kept by the chronometer. Each hour of difference corresponds to fifteen degrees of longitude. John Harrison proved the method in the 1760s; Pierre Le Roy, Ferdinand Berthoud, John Arnold and Thomas Earnshaw then developed the detent escapement and the compensation balance that made chronometers practical to manufacture.
By the nineteenth century London, Liverpool, Le Locle and Glashütte supplied navies and merchant fleets. A typical box chronometer has a spring-detent escapement, a fusee to equalise mainspring torque, a bimetallic compensation balance with a helical balance spring, and is mounted in gimbals inside a wooden box so that it stays level.
What to look for
- Gimbals and a three-tier wooden box with a glazed inner lid.
- A power-reserve ('up and down') indicator on the dial, usually showing 56 hours on two-day instruments.
- Spring-detent escapement and a cylindrical (helical) balance spring visible through the movement.
- Admiralty or navy marks (broad arrow), and rating certificates from observatories.
- The maker's number on the dial and movement; many makers' registers survive, allowing dating.
Dating clues
- Earnshaw-type spring-detent chronometers became standard after about 1800.
- Auxiliary compensation devices on the balance appear from the mid-nineteenth century.
- Quartz and radio time signals ended routine use of mechanical chronometers in the 1970s and 1980s.
General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.
Read next:Spring detent (chronometer) escapementFuseeBalance spring (hairspring)Detent escapement
Related records
Movements & Components · 1900
Pocket watch by A. Lange & Söhne, Germany, 1900
Kulturstiftung Sachsen-Anhalt - Museum Schloss Neuenburg
Pocket Watches · c. 1941
A. Lange & Söhne pocket watch, Observation Pocket Watch, circa 1941
Antiquorum auction archive, Geneva
Pocket Watches · c. 1946
A. Lange & Söhne pocket watch, Military Observation Pocket Watch, circa 1946
Antiquorum auction archive, Geneva
Pocket Watches · c. 1942
A. Lange & Söhne pocket watch, Military Observation Pocket Watch, circa 1942
Antiquorum auction archive, Geneva
Instruments · c. 1855
Sundial by E. Boissier, Germany, c. 1855
German Clock Museum
Instruments · 1862
Hemispherical sundial, on porcelain stand with glass cover, inscribed "H Schmeisser Patent 1861 Berlin A Meissner".
Science Museum Group, London
Instruments · 1875
Nocturnal by Carl Spitzweg, Germany, 1875
Catholic University of Leuven
Instruments · 1877–1894
Sundial by Stuttgart Eckstein, Germany, 1877–1894
Schola Graphidis Art Collection, Budapest
