
Instruments · Lever chronometer pocket watch
A. Lange & Söhne 18K Gold Lever-Chronometer No. 58256
- Maker / attribution
- A. Lange & Söhne (source attribution)
- Date
- c. 1906
- Historical period
- Golden Age of Mechanical Watchmaking (1900 – 1945)
- Country of origin
- Germany
- Object type
- Lever chronometer pocket watch
- Holding institution
- Antiquorum
- Accession / object no.
- 185
- Credit line
- Antiquorum
- Catalogue title (original)
- A. Lange & Söhne, Glashütte, No. 58256, circa 1906.Very fine 18K gold lever-chronometer. (English)
View the source record ↗ (opens another website in a new tab)Suggest a correction
Record summary
Held and catalogued by Antiquorum (object number 185), this is a lever chronometer pocket watch attributed to A. Lange & Söhne, made in Germany, dated c. 1906. The Atlas places it in the Golden Age of Mechanical Watchmaking period (1900 – 1945) of its Instruments collection. The record is illustrated with 1 photograph.
Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.
Catalogue description
Original object description
This circa 1906 pocket chronometer from A. Lange & Söhne spans 54 mm in diameter and shares serial number 58256 on both its case and movement. The four-body "demi-bassine" case is rendered in 18K gold with engine-turned decoration and encloses an inner hinged gold cuvette stamped with the caliber number. Roman numerals, an outer minute scale, gold spade hands, and a recessed small seconds subdial define the white enamel dial. Inside, the first-quality 17-jewel movement utilizes a gilded-brass three-quarter plate, a Breguet balance spring, a bimetallic compensation balance, and a straight-line lever escapement. Additional refinements include gold chaton mountings on the plate, an escape wheel and pallet fork made of gold, a diamond cap jewel on the balance arbor, and Lange's patented lever-setting mechanism. The manufacture's signature is featured on the movement and dial, while an internal firm hallmark is stamped within the case back. Previous auction records assign the watch an aggregate condition grade of "AA" ("Very good"), based on individual evaluations of the dial, case, and movement.
Inscriptions & marks
58256
Historical context
Golden Age of Mechanical Watchmaking (1900 – 1945)
The wristwatch displaces the pocket watch; waterproof cases, self-winding and grand complications.
Timing instruments became electrical and specialised: industrial time recorders, sports timers and aviation instruments.
Read the period in the timelineMore instruments from this periodEarlier: Industrial Revolution
Atlas type guide
Marine chronometers
A marine chronometer is a precision timekeeper carried at sea to find longitude: the navigator compares local noon, observed with a sextant, with the time at a reference meridian kept by the chronometer. Each hour of difference corresponds to fifteen degrees of longitude. John Harrison proved the method in the 1760s; Pierre Le Roy, Ferdinand Berthoud, John Arnold and Thomas Earnshaw then developed the detent escapement and the compensation balance that made chronometers practical to manufacture.
By the nineteenth century London, Liverpool, Le Locle and Glashütte supplied navies and merchant fleets. A typical box chronometer has a spring-detent escapement, a fusee to equalise mainspring torque, a bimetallic compensation balance with a helical balance spring, and is mounted in gimbals inside a wooden box so that it stays level.
What to look for
- Gimbals and a three-tier wooden box with a glazed inner lid.
- A power-reserve ('up and down') indicator on the dial, usually showing 56 hours on two-day instruments.
- Spring-detent escapement and a cylindrical (helical) balance spring visible through the movement.
- Admiralty or navy marks (broad arrow), and rating certificates from observatories.
- The maker's number on the dial and movement; many makers' registers survive, allowing dating.
Dating clues
- Earnshaw-type spring-detent chronometers became standard after about 1800.
- Auxiliary compensation devices on the balance appear from the mid-nineteenth century.
- Quartz and radio time signals ended routine use of mechanical chronometers in the 1970s and 1980s.
General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.
Read next:Spring detent (chronometer) escapementFuseeDetent escapement
Related records
Movements & Components · 1900
Pocket watch by A. Lange & Söhne, Germany, 1900
Kulturstiftung Sachsen-Anhalt - Museum Schloss Neuenburg
Pocket Watches · c. 1941
A. Lange & Söhne pocket watch, Observation Pocket Watch, circa 1941
Antiquorum auction archive, Geneva
Pocket Watches · c. 1946
A. Lange & Söhne pocket watch, Military Observation Pocket Watch, circa 1946
Antiquorum auction archive, Geneva
Pocket Watches · c. 1942
A. Lange & Söhne pocket watch, Military Observation Pocket Watch, circa 1942
Antiquorum auction archive, Geneva
Instruments · 1900–1999
Sundial by Alwin Tölle, Germany, 1900–1999
Badisches Landesmuseum Karlsruhe
Instruments · c. 1920
Stopwatch / timer by A. Schlenker-Grusen, Germany, c. 1920
German Clock Museum
Instruments · 1940–1945
AEG Electrical time clock brought back from Germany at the end of WW II. (Ex Hermann Goering Instutut at Volkenrode)
Science Museum Group, London
Instruments · c. 1900
Stopwatch by Großherzoglich Badische Uhrmacherschule, c. 1900
German Clock Museum
