Skip to content
18th Century Bracket Clock by William Creak — view 1 of 1
View 1 of 1 · Image: Bonhams (via Invaluable) · original image source (opens another website in a new tab)

Clocks · Bracket clock

18th Century Bracket Clock by William Creak

DocumentedDocumented from an auction catalogue; attribution as stated by the auction house.
Maker / attribution
William Creak (source attribution)
Date
18th century
Country of origin
England
Place
London
Object type
Bracket clock
Dimensions
62cm
Lot
283
Credit line
Bonhams (via Invaluable)
Catalogue title (original)
Mouvement de pendule du XVIIIe siècle par William Creak, caisse d'époque postérieure An 18th century bracket clock movement now in a later case. William Creak, London (English)

View the source record (auction lot) ↗ (opens another website in a new tab)Suggest a correction

Record summary

Catalogued by Bonhams (via Invaluable) (lot 283), this is a bracket clock attributed to William Creak, made in London, England, dated 18th century. The Atlas places it in the Early Modern Horology period (1600 – 1750) of its Clocks collection. Recorded dimensions: 62cm. The record is illustrated with 1 photograph.

Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.

Catalogue description

Original object description

Originating from an esteemed private collection, this 18th-century bracket clock houses an original period mechanism within a later mahogany-veneered case measuring 62 cm in height. The exterior is fitted with a brass overhead handle, a bell-top roof adorned with four acorn finials, side viewing apertures, pierced sound frets, and block feet. Its 7-inch brass dial features Roman and Arabic numerals, six cast brass spandrels, a strike/silent selector situated in the arch, a shaped date opening, and a textured matted center holding an inset plaque reading 'William Creek, London' (a slight variation on William Creak). Supported by five knopped pillars, the eight-day, twin-fusee movement is governed by a verge escapement with a short bob pendulum and chimes hours upon a top bell; its backplate is engraved with foliate scrolls and chinoiserie figures, and both gear trains are noted by auction cataloguers as operational.

Historical context

Early Modern Horology (1600 – 1750)

Huygens' pendulum and balance spring transform accuracy; English makers develop the anchor and deadbeat escapements.

Huygens's pendulum (1656–57) improved clock accuracy from about a quarter of an hour to under a minute a day. The anchor escapement (c. 1670) and the long seconds pendulum created the longcase clock; London makers such as Fromanteel, Knibb, Tompion and Quare led European clockmaking, and French makers created the Boulle pendule.

Read the period in the timelineMore clocks from this periodEarlier: Renaissance Horology

Atlas type guide

Bracket, table and spring-driven clocks

Spring-driven clocks freed timekeeping from the hanging weight. The coiled mainspring, documented from the fifteenth century, made portable table clocks possible; to even out its declining force, makers used the fusee, a conical pulley connected to the barrel by a gut line or chain. Renaissance table clocks from Augsburg and Nuremberg — drum-shaped, square or tower-shaped in gilt brass — were luxury scientific objects, often with astronomical dials and alarms.

After the pendulum, English makers developed the bracket clock: a wooden case with a carrying handle, a short pendulum with a verge escapement, and often repeating work to sound the hours on demand at night. Later examples use the anchor escapement. In the nineteenth century, 'table clock' became a broad term for spring clocks of every nationality.

What to look for

  • A fusee in the movement (cone-shaped pulley) and the type of line — gut or chain.
  • Verge escapement with a short bob pendulum, often with a decoratively engraved backplate.
  • Repeat cords or buttons that make the clock strike again on demand.
  • Gilt-brass engraved cases and horizontal dials on Renaissance pieces.
  • Case shapes: inverted bell, bell top, break-arch, lancet or balloon.

Dating clues

  • Drum and tower table clocks: c. 1520–1650.
  • Ebony veneered English bracket clocks with verge escapements: c. 1670–1800.
  • Engraved backplates were usual on English clocks until c. 1800, then generally plain.

General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.

Read next:Anchor (recoil) escapement

Related records