
Clocks · Tall case clock
18th C. Josiah Emery Mahogany Tall Case Clock
- Maker / attribution
- Josiah Emery (source attribution)
- Date
- 18th c.
- Historical period
- Early Modern Horology (1600 – 1750)
- Country of origin
- England
- Object type
- Tall case clock
- Dimensions
- Approx. 87 in. high, 21 in. wide, 10.5 in. deep
- Auction house
- Ahlers & Ogletree / Bidsquare
- Lot
- 949
- Credit line
- Ahlers & Ogletree / Bidsquare
- Catalogue title (original)
- 18th C., Josiah Emery Mahogany Tall Case Clock sold at auction on 12th January | Bidsquare (English)
View the source record (auction lot) ↗ (opens another website in a new tab)Suggest a correction
Record summary
Catalogued by Ahlers & Ogletree / Bidsquare (lot 949), this is a tall case clock attributed to Josiah Emery, made in England, dated 18th c.. The Atlas places it in the Early Modern Horology period (1600 – 1750) of its Clocks collection. Recorded dimensions: Approx. 87 in. high, 21 in. wide, 10.5 in. deep. The record is illustrated with 1 photograph.
Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.
Catalogue description
Original object description
Attributed by auction cataloguers to Swiss-born London clockmaker Josiah Emery (ca. 1725–1797), this George III longcase clock stands in a dark mahogany cabinet approximately 87 inches tall, 21 inches wide, and 10.5 inches deep. The structure features a broken-arch pediment hood flanked by stop-fluted columns with brass accents, an extended trunk door crowned with an arched molding, and a paneled plinth resting on double base molding. Behind the glazed hood door, the 12-inch silvered arched dial displays Roman hour numerals, blued steel pierced hands, a strike/silent selector set into the arch, and a sub-seconds chapter ring beneath the XII marker. Pendulum regulation and two brass-cased weights govern the brass movement, which sounds the hours upon a bell and is noted in sales records as functioning upon testing. Because visible maker marks or signatures are absent on the dial and case in the documentation, the attribution depends on auction records alone. Documented condition reports cite standard surface wear consistent with age, a minor loss at the upper left of the backboard, a slightly loose original glass pane, a missing lock on the hood door, and a likely replaced seconds hand.
Historical context
Early Modern Horology (1600 – 1750)
Huygens' pendulum and balance spring transform accuracy; English makers develop the anchor and deadbeat escapements.
Huygens's pendulum (1656–57) improved clock accuracy from about a quarter of an hour to under a minute a day. The anchor escapement (c. 1670) and the long seconds pendulum created the longcase clock; London makers such as Fromanteel, Knibb, Tompion and Quare led European clockmaking, and French makers created the Boulle pendule.
Read the period in the timelineMore clocks from this periodEarlier: Renaissance Horology
Atlas type guide
Longcase (tall-case or grandfather) clocks
The longcase clock was born from two seventeenth-century innovations: Christiaan Huygens's pendulum (1656–57) and the anchor escapement (c. 1670). A long seconds pendulum, nearly a metre long, swings with a small arc, and enclosing it together with the driving weights in a tall wooden case protected the mechanism and created a new piece of furniture. London makers such as Ahasuerus Fromanteel, Thomas Tompion and Joseph Knibb set the pattern.
By the eighteenth century longcase clocks were made throughout Britain, the Netherlands, Scandinavia (the Swedish Mora clock), France (the Comtoise from the Franche-Comté), Germany and colonial America. Eight-day movements with two weights became standard in better clocks; thirty-hour clocks with one weight and a rope or chain were cheaper alternatives.
What to look for
- Winding holes in the dial: two (eight-day, going and striking) or none (thirty-hour, pulled up by a chain).
- Brass dials with applied chapter rings (earlier) versus painted iron 'white' dials (after c. 1770 in Britain).
- Moon-phase arches, date apertures, seconds dials and maker's name on the dial.
- Case woods and style: ebonised, walnut marquetry, lacquer, oak or mahogany; regional styles from London, Lancashire, Scotland or America.
- Whether the movement and dial match the case — 'marriages' are common.
Dating clues
- Square brass dials suggest c. 1670–1720; arched brass dials c. 1715–1790.
- Painted (white) dials were made by Birmingham dial-makers from about 1772.
- Comtoise clocks with repoussé pendulums are mostly nineteenth century.
General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.
Read next:Anchor (recoil) escapementDeadbeat escapementAnchor escapement
Related records
Movements & Components · 1792
Escapement model by Josiah Emery, England, 1792
Science Museum Group, London
Movements & Components · c. 1780
Pocket Watch Movement - Josiah Emery, London, c. 1780
Museums Victoria, Melbourne
Pocket Watches · c. 1780
Double-case watch by Josiah Emery, England, c. 1780
Museo Galileo, Florence
Pocket Watches · c. 1792
Pocket watch no. 1350 by Josiah Emery
Royal Museums Greenwich
Clocks · 1598–1603
Circular table-clock with calendrical and lunar indications made by Nicholas Vallin in London between 1598 and 1603.
Science Museum Group, London
Clocks · 1611
English iron lantern clock, with wheel balance, by John Holloway, Market Lavington, Wiltshire, England, 1611.
Science Museum Group, London
Clocks · 1630
Lantern clock by Francis Forman, England, 1630
Science Museum Group, London
Clocks · 1632–1640
Turret clock, England, 1632–1640
Science Museum Group, London
