Skip to content

Instruments · Marine chronometer

Nugent Wells Marine Chronometer Clock

DocumentedDocumented from the holding institution's catalogue record.
Maker / attribution
Nugent Wells (source attribution)
Date
c. 1870s
Country of origin
England
Object type
Marine chronometer
Materials / technique
Rosewood and brass
Dimensions
18cm x 16.5cm x 18cm
Holding institution
Antiquorum
Accession / object no.
164
Credit line
Antiquorum
Catalogue title (original)
NUGENT WELLS, MARINE CHRONOMETER CLOCK, ROSEWOOD AND GILDED BRASS (English)

View the source record ↗ (opens another website in a new tab)Suggest a correction

Record summary

Held and catalogued by Antiquorum (object number 164), this is a marine chronometer attributed to Nugent Wells, made in England, dated c. 1870s. The Atlas places it in the Industrial Revolution period (1850 – 1900) of its Instruments collection. Materials and techniques recorded by the source: Rosewood and brass. Recorded dimensions: 18cm x 16.5cm x 18cm. The record is illustrated with 1 photograph.

Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.

Catalogue description

Original object description

Constructed circa the 1870s, this marine chronometer by Nugent Wells is mounted in a gimballed brass bowl within a brass-reinforced rosewood travel chest. The outer cabinet is detailed with gilded brass corner brackets, lateral transport handles, a glazed viewing aperture in the top lid, and an exterior brass plaque bearing serial number 7/856, the maker's signature, and the locations Newport and London. The silvered dial mirrors the maker's signature and features radial Roman hours, a peripheral minute ring, a 56-hour state-of-wind indicator beneath 12 o'clock, and a subsidiary seconds track at 6 o'clock. Driving the mechanism is a fusee and chain layout coupled with spotted gilded full plates, regulated by a spring detent escapement and a free-sprung, two-arm bimetallic balance with cylindrical sliding weights, timing screws, and a helical balance spring. Matching the exterior plate, serial number 7/856 is stamped on both the movement and case. Offered as Lot 164, the chronometer received an auction condition rating of AA, indicating very good overall preservation with minor surface wear to the timber; the mechanism is documented as functioning well, though professional cleaning and regulation are advised prior to active use.

Inscriptions & marks

7/856

Historical context

Industrial Revolution (1850 – 1900)

American interchangeable-parts manufacture; railroad time standards; Swiss and German factory systems.

Instruments spread into industry, science and sport: stopwatches, chronoscopes, metronomes, watchmen's clocks and time recorders.

Read the period in the timelineMore instruments from this periodEarlier: Precision & Scientific Horology

Atlas type guide

Marine chronometers

A marine chronometer is a precision timekeeper carried at sea to find longitude: the navigator compares local noon, observed with a sextant, with the time at a reference meridian kept by the chronometer. Each hour of difference corresponds to fifteen degrees of longitude. John Harrison proved the method in the 1760s; Pierre Le Roy, Ferdinand Berthoud, John Arnold and Thomas Earnshaw then developed the detent escapement and the compensation balance that made chronometers practical to manufacture.

By the nineteenth century London, Liverpool, Le Locle and Glashütte supplied navies and merchant fleets. A typical box chronometer has a spring-detent escapement, a fusee to equalise mainspring torque, a bimetallic compensation balance with a helical balance spring, and is mounted in gimbals inside a wooden box so that it stays level.

What to look for

  • Gimbals and a three-tier wooden box with a glazed inner lid.
  • A power-reserve ('up and down') indicator on the dial, usually showing 56 hours on two-day instruments.
  • Spring-detent escapement and a cylindrical (helical) balance spring visible through the movement.
  • Admiralty or navy marks (broad arrow), and rating certificates from observatories.
  • The maker's number on the dial and movement; many makers' registers survive, allowing dating.

Dating clues

  • Earnshaw-type spring-detent chronometers became standard after about 1800.
  • Auxiliary compensation devices on the balance appear from the mid-nineteenth century.
  • Quartz and radio time signals ended routine use of mechanical chronometers in the 1970s and 1980s.

General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.

Read next:Detent escapement

Related records