
Clocks · Lantern clock
Lantern clock by John Smorthwait
- Maker / attribution
- John Smorthwait (source attribution)
- Date
- c. 1730
- Historical period
- Early Modern Horology (1600 – 1750)
- Country of origin
- England
- Object type
- Lantern clock
- Dimensions
- 37 cm (14½ in.) high
- Auction house
- Sotheby's
- Lot
- 60
- Credit line
- Sotheby's
- Catalogue title (original)
- (#60) A lantern clock, John Smorthwait, Colchester, circa 1730 (English)
View the source record (auction lot) ↗ (opens another website in a new tab)Suggest a correction
Record summary
Catalogued by Sotheby's (lot 60), this is a lantern clock attributed to John Smorthwait, made in England, dated c. 1730. The Atlas places it in the Early Modern Horology period (1600 – 1750) of its Clocks collection. Recorded dimensions: 37 cm (14½ in.) high. The record is illustrated with 1 photograph.
Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.
Catalogue description
Original object description
Catalogued by Sotheby's as an English brass lantern clock by John Smorthwait of Colchester dating to approximately 1730, this timepiece stands 37 cm (14½ inches) high. The case architecture incorporates slender corner columns, turned brass feet, urn-shaped finials, and pierced dolphin frets positioned beneath an arched bell support and an overhead bell. The 6½-inch silvered chapter ring with Roman numerals and lozenge half-hour divisions encircles an engraved foliate dial center, carrying a solitary replaced pierced hand. Documentation notes an additional signature on the back of the dial plate, while the weight- and rope-driven posted movement features an anchor escapement, an external countwheel, and rear iron hanging spurs with wall brackets.
Identity and Attribution
Recorded by Sotheby's with an overall height of 37 cm (14½ inches), this clock is assigned to the Colchester maker John Smorthwait, circa 1730. Auction documentation notes a second engraved signature on the reverse of the dial sheet, identified as probable trial engraving.
Frame and Visible Case Architecture
Front-facing viewing reveals slender turned corner pillars standing on corresponding feet, surmounted by urn finials and pierced frets under a bell retained by arched straps. Although obscured from the front, auction records state that the rear of the case retains an iron suspension hoop and wall spikes.
Dial Configuration and Mechanism Reports
Sotheby's describes a posted frame mechanism driven by weights and ropes, incorporating an anchor escapement and an external countwheel that cannot be verified from frontal views. The dial assembly features an overlapping 6½-inch silvered chapter ring marked with Roman figures and lozenge intervals, enclosing a gilded brass central section with foliate engraving and a single pierced black hand recorded as a later replacement.
Historical context
Early Modern Horology (1600 – 1750)
Huygens' pendulum and balance spring transform accuracy; English makers develop the anchor and deadbeat escapements.
Huygens's pendulum (1656–57) improved clock accuracy from about a quarter of an hour to under a minute a day. The anchor escapement (c. 1670) and the long seconds pendulum created the longcase clock; London makers such as Fromanteel, Knibb, Tompion and Quare led European clockmaking, and French makers created the Boulle pendule.
Read the period in the timelineMore clocks from this periodEarlier: Renaissance Horology
Atlas type guide
Lantern, chamber and Gothic clocks
Domestic weight-driven clocks were made in southern Germany, Switzerland, Italy and Flanders from the fifteenth century. These 'Gothic' or chamber clocks have an open iron frame with corner posts, a verge escapement controlled by a foliot or balance wheel, and often an alarm or hour striking on a bell mounted above.
In England the lantern clock appeared around 1600: a brass posted-frame clock with a bell on top under decorative frets, hung on a hook or set on a wall bracket. After about 1658 many were converted to pendulum control, so originality of the escapement is a key question for any surviving example.
What to look for
- Iron (continental) or brass (English) posted frames with turned corner pillars and finials.
- A single hour hand — minute hands are rare before the pendulum era.
- Evidence of conversion: plugged holes, replaced escapement wheels or later pendulums.
- Fret designs and engraving on the dial centre, which help date English lantern clocks.
Dating clues
- Continental Gothic chamber clocks: c. 1450–1650.
- English lantern clocks: c. 1600–1720, with provincial examples later.
- Short 'bob' pendulum conversions after 1658; long pendulums with anchor escapement after c. 1670.
General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.
Read next:FoliotVerge escapement
Related records
Clocks · 1598–1603
Circular table-clock with calendrical and lunar indications made by Nicholas Vallin in London between 1598 and 1603.
Science Museum Group, London
Clocks · 1611
English iron lantern clock, with wheel balance, by John Holloway, Market Lavington, Wiltshire, England, 1611.
Science Museum Group, London
Clocks · 1630
Lantern clock by Francis Forman, England, 1630
Science Museum Group, London
Clocks · 1632–1640
Turret clock, England, 1632–1640
Science Museum Group, London
Clocks · 1645–1655
Balance-wheel brass lantern clock, with two driving weights and one counterweight, by Thomas Knifton, Cross Keys, Lothbury, London, England, 1645–1655.
Science Museum Group, London
Clocks · c. 1650
Lantern alarm clock, silver, by David Bouquet, circa 1650
Victoria and Albert Museum, London
Clocks · 1650–1660
Lantern clock by Peter Closon, England, 1650–1660
Science Museum Group, London
Clocks · c. 1660
Longcase clock, c. 1660, English, made by Ahasuerus Fromanteel
Victoria and Albert Museum, London
