Skip to content

Instruments · Keyless lever chronometer

L. Fernier & Frères 18K pink gold keyless lever chronometer

DocumentedDocumented from the holding institution's catalogue record.
Maker / attribution
L. Fernier & Frères (source attribution)
Date
c. 1890
Country of origin
France
Object type
Keyless lever chronometer
Materials / technique
18K pink gold
Holding institution
Antiquorum
Accession / object no.
430
Credit line
Antiquorum
Catalogue title (original)
L. Fernier & Frères, Besançon, circa 1890.Very fine and rare 18K pink gold keyless lever chronometer with special over-winding prevention in original wooden fitted box. (English)

View the source record ↗ (opens another website in a new tab)Suggest a correction

Record summary

Held and catalogued by Antiquorum (object number 430), this is a keyless lever chronometer attributed to L. Fernier & Frères, made in France, dated c. 1890. The Atlas places it in the Industrial Revolution period (1850 – 1900) of its Instruments collection. Materials and techniques recorded by the source: 18K pink gold. The record is illustrated with 1 photograph.

Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.

Catalogue description

Original object description

Produced around 1890 in France by Besançon watchmakers L. Fernier & Frères, this 18K pink gold keyless lever chronometer pocket watch is preserved with its original custom-fitted wooden box. Its four-body construction follows the "bassine et filets" design, featuring an engine-turned rear cover alongside signatures on both the dial and case. Beneath an 18K rose gold hinged cuvette, a glazed internal gold bezel reveals the 44 mm (19 1/2''') frosted-gilt half-plate mechanism. This 20-jewel caliber incorporates raised chatons securing the upper jewels, an in-line lever escapement, a bimetallic split balance wheel, and a Breguet balance spring in blued steel. The manual winding mechanism is operated through a gold slide positioned at 11 o'clock, which incorporates an over-winding safeguard that disengages upon reaching maximum mainspring tension to guard against spring breakage. Displaying the time through gold spade hands, the white enamel dial features Roman hour indicators, outer Arabic markers denoting five-minute intervals, and a sunken subsidiary seconds dial.

Historical context

Industrial Revolution (1850 – 1900)

American interchangeable-parts manufacture; railroad time standards; Swiss and German factory systems.

Instruments spread into industry, science and sport: stopwatches, chronoscopes, metronomes, watchmen's clocks and time recorders.

Read the period in the timelineMore instruments from this periodEarlier: Precision & Scientific Horology

Atlas type guide

Marine chronometers

A marine chronometer is a precision timekeeper carried at sea to find longitude: the navigator compares local noon, observed with a sextant, with the time at a reference meridian kept by the chronometer. Each hour of difference corresponds to fifteen degrees of longitude. John Harrison proved the method in the 1760s; Pierre Le Roy, Ferdinand Berthoud, John Arnold and Thomas Earnshaw then developed the detent escapement and the compensation balance that made chronometers practical to manufacture.

By the nineteenth century London, Liverpool, Le Locle and Glashütte supplied navies and merchant fleets. A typical box chronometer has a spring-detent escapement, a fusee to equalise mainspring torque, a bimetallic compensation balance with a helical balance spring, and is mounted in gimbals inside a wooden box so that it stays level.

What to look for

  • Gimbals and a three-tier wooden box with a glazed inner lid.
  • A power-reserve ('up and down') indicator on the dial, usually showing 56 hours on two-day instruments.
  • Spring-detent escapement and a cylindrical (helical) balance spring visible through the movement.
  • Admiralty or navy marks (broad arrow), and rating certificates from observatories.
  • The maker's number on the dial and movement; many makers' registers survive, allowing dating.

Dating clues

  • Earnshaw-type spring-detent chronometers became standard after about 1800.
  • Auxiliary compensation devices on the balance appear from the mid-nineteenth century.
  • Quartz and radio time signals ended routine use of mechanical chronometers in the 1970s and 1980s.

General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.

Read next:Spring detent (chronometer) escapementFuseeDetent escapement

Related records