Skip to content

Pocket Watches · Fusee pair case pocket watch

Joseph Johnson English Fusee Pair Case Pocket Watch

DocumentedDocumented from an auction catalogue; attribution as stated by the auction house.
Maker / attribution
Joseph Johnson (source attribution)
Date
c. 1802
Country of origin
England
Object type
Fusee pair case pocket watch
Materials / technique
Gold outer with floral motif
Dimensions
51mm
Auction house
Christie’s
Lot
224
Credit line
Christie’s
Catalogue title (original)
JOSEPH JOHNSON, ENGLISH FUSEE PAIR CASE POCKET WATCH, | Christie’s (English)

View the source record (auction lot) ↗ (opens another website in a new tab)Suggest a correction

Record summary

Catalogued by Christie’s (lot 224), this is a fusee pair case pocket watch attributed to Joseph Johnson, made in England, dated c. 1802. The Atlas places it in the Precision & Scientific Horology period (1750 – 1850) of its Pocket Watches collection. Materials and techniques recorded by the source: Gold outer with floral motif. Recorded dimensions: 51mm. The record is illustrated with 1 photograph.

Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.

Catalogue description

Original object description

This 51 mm key-wound pair-case watch, catalogued by Christie's with a production date of circa 1802, is ascribed to Joseph Johnson. Its floral chased gold outer casing exhibits surface wear and preserves three vintage service papers from J.A.S Harris inside, while an engraved floral pendant and round bow rise above 12 o'clock. The inner case displays minor scratches, indentations near the 3 o'clock point, slight abrasion on the crystal, and worn maker's marks and hallmarks whose specific impressions are not documented. Rendered over an engine-turned field, the tricolour gold dial is decorated with applied rose, yellow, and green/white gold floral sprays, applied Roman numerals, and a blued steel hand on a 6 o'clock subsidiary seconds register. Although catalogued as functional, the movement is unpictured in documentation and was not evaluated for timekeeping precision.

Historical context

Precision & Scientific Horology (1750 – 1850)

Harrison solves longitude; Mudge invents the lever; Breguet's Paris workshop defines the modern watch.

From 1750 to 1850 the watch became a precision instrument. Mudge's lever escapement, the cylinder escapement, Lépine's thin bar calibre, Breguet's innovations (overcoil, tourbillon, perpétuelle) and the pocket chronometer of Arnold and Earnshaw all date from this period, while verge watches remained common in cheaper production.

Read the period in the timelineMore pocket watches from this periodEarlier: Early Modern Horology

Atlas type guide

Verge and pair-cased watches

After Christiaan Huygens and Robert Hooke applied the balance spring around 1675, the verge watch became a reasonably reliable timekeeper and the minute hand became standard. Through the eighteenth century the typical English watch was a pair-cased verge: a fusee movement with a pierced, engraved balance cock, housed in an inner case and a separate protective outer case, often of repoussé gold, shagreen, tortoiseshell or enamel.

French watches of the same period were thicker 'oignons', later replaced by elegant thinner watches following Jean-Antoine Lépine's bar-bridge calibre of c. 1770. Dutch, Swiss and German makers supplied international markets, and verge watches were made until the mid-nineteenth century as cheaper alternatives to the cylinder and lever.

What to look for

  • The pierced balance cock on the backplate: winged (continental) or with a foot (English); its style dates the watch.
  • Fusee and chain visible through the movement; key winding through the dial (early) or case back.
  • Hallmarks inside English silver or gold cases, which give a date letter.
  • Maker's name and serial number engraved on the backplate; watch papers inside outer cases.
  • Enamel dials (after c. 1720) versus earlier champlevé metal dials.

Dating clues

  • Champlevé dials: c. 1680–1730; white enamel dials thereafter.
  • English case hallmarks give the year of assay to within a year.
  • Verge watches persisted in cheap production until c. 1850.

General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.

Read next:Verge escapementBalance spring (hairspring)Verge escapement

Related records