Skip to content

Pocket Watches · Scent flask watch

Double scent flask with integrated watch

DocumentedDocumented from the holding institution's catalogue record.
Maker / attribution
Unrecorded in source
Date
c. 1870
Country of origin
Geneva
Object type
Scent flask watch
Holding institution
Antiquorum
Accession / object no.
436
Credit line
Antiquorum
Catalogue title (original)
Unsigned, probably Geneva, circa 1870, made for the Oriental market.Very fine and very rare 18K gold and enamel diamond-set double scent flask in the form of a Royal seal, fitted with a watch. (English)

View the source record ↗ (opens another website in a new tab)Suggest a correction

Record summary

Held and catalogued by Antiquorum (object number 436), this is a scent flask watch, made in Geneva, dated c. 1870. The Atlas places it in the Industrial Revolution period (1850 – 1900) of its Pocket Watches collection. The record is illustrated with 1 photograph.

Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.

Catalogue description

Original object description

Classified as a scent flask watch, this anonymous creation dating to around 1870 is attributed to Geneva and was designed specifically for the Oriental market. Fabricated from 18-karat gold and accented with enamel, the luxury object assumes the sculptural form of a royal seal and includes an integral gold suspension chain ending in a circular ring. The main body features fluted sections separated by vertical lines of diamonds, intersected around the middle by a decorative frieze of translucent red flinqué enamel patterned with four-petaled diamond flowers. Unscrewing the diamond-set crown at the summit reveals the first of two perfume compartments. The lower perfume flask and the miniature timepiece are housed inside a square base adorned with engraving and diamonds. A hinged panel positioned on the side allows access for hand-setting, while the watch is wound via an engraved bezel around the foot, prefiguring the 1889 bezel-winding design patented by M. LeCoultre. The white enamel dial is marked with black Roman hour numerals and traversed by blued steel spade hands. Tailored to fit the internal cavity of the base, the nickel-finished movement comprises a circular core flanked by semicircular extensions. Mechanically, it is built with 10 jewels, a cylinder escapement, a flat balance spring, and a gilt balance with three arms. Auction condition reports give the piece an aggregate rating of AAA, noting the movement and case at grade 3 (Good) and recording the dial condition as 3-5-01.

Historical context

Industrial Revolution (1850 – 1900)

American interchangeable-parts manufacture; railroad time standards; Swiss and German factory systems.

Machine production with interchangeable parts, pioneered by Waltham (1850s) and adopted by Elgin, Longines, Omega and others, made reliable lever watches widely affordable. Keyless winding became standard, railroad watch standards were introduced (1890s), and Swiss and American industries competed globally.

Read the period in the timelineMore pocket watches from this periodEarlier: Precision & Scientific Horology

Atlas type guide

Pocket watches

The pocket watch was the dominant personal timekeeper from the late seventeenth century until the First World War. Its development tracks the history of the escapement: verge watches with fusees until the late eighteenth century; Thomas Mudge's lever escapement (c. 1755) and the cylinder escapement popularised by George Graham and later by Swiss makers; and the Swiss and English lever watches of the nineteenth century. Lépine's bar-bridge calibre and keyless winding made watches thinner and easier to use.

Industrialisation transformed the trade: American factories such as Waltham (from 1850) and Elgin produced interchangeable parts by machine, and Swiss makers responded with their own mechanisation after the 1876 Philadelphia Exhibition. By 1900 a reliable watch was affordable to millions; the finest makers continued to produce complications and precision watches.

What to look for

  • The escapement: verge (crown wheel), cylinder, duplex, English or Swiss lever.
  • Key winding (a square arbor in dial or back) or keyless crown winding.
  • Signatures and serial numbers on the movement, dial and inside case back.
  • Hallmarks, case maker's marks and gold or silver standards stamped in the case.
  • Dial material: enamel, silver, gold, later printed metal.

Dating clues

  • Verge watches dominate before c. 1800; cylinder watches c. 1770–1900; lever watches after c. 1820.
  • Keyless winding: increasingly common after c. 1860.
  • Manufacturer serial number lists exist for Waltham, Elgin, Longines, Omega, Patek Philippe and others.

General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.

Read next:Verge escapementDetached lever escapementFuseeIdentification Centre

Related records