Skip to content

Pocket Watches · Verge repeating pocket watch

Charlemont Gold Openface Pocket Watch with Verge Escapement and Repetition

DocumentedDocumented from the holding institution's catalogue record.
Maker / attribution
Charlemont (source attribution)
Date
c. 1800
Country of origin
France
Object type
Verge repeating pocket watch
Holding institution
Lempertz
Accession / object no.
261
Credit line
Lempertz
Catalogue title (original)
A gold openface pocketwatch with verge escapement and repetition,. attached a Russian 14k gold chain - Lot 261 (English)

View the source record ↗ (opens another website in a new tab)Suggest a correction

Record summary

Held and catalogued by Lempertz (object number 261), this is a verge repeating pocket watch attributed to Charlemont, made in France, dated c. 1800. The Atlas places it in the Precision & Scientific Horology period (1750 – 1850) of its Pocket Watches collection. The record is illustrated with 1 photograph.

Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.

Catalogue description

Original object description

Originating circa 1800 and carrying the signature 'Charlemont à Besancon', this openface gold pocket watch measures 5.5 cm across. Time is indicated on a white enamel dial with Arabic numerals and gilt hands, alongside an offset aperture close to the 2 o'clock position for key-winding access. The gilt movement incorporates a verge escapement and a fusee-and-chain assembly, featuring a quarter-striking repeating complication that chimes against an internal bell upon pushing the pendant. A Russian 14-karat red gold chain with a T-bar fitting is included alongside the watch.

Dial and Exterior Construction

A 5.5 cm openface housing surrounds an enamel dial showing Arabic hour digits, hands finished in gilt, and a dial-side key aperture situated near the 2 o'clock marker. Connected to the pocket watch is a 35 cm Russian red gold chain of 14-karat purity.

Movement and Complications

The gilded mechanical movement utilizes a fusee and chain with a verge escapement, carrying the mark 'Charlemont à Besancon'. Depressing the pendant activates the quarter-repeating function, driving internal hammers to sound against a bell secured to the bottom plate.

Condition and Recorded Data

The auction house estimates the watch to date from circa 1800, recording its total mass at 137.1 g, with the complementary chain accounting for 25.4 g. The original winding key has been lost. Additionally, the auction documentation contains what appears to be a clerical error, citing an inverted chronological span of '1986 - 1908' regarding the chain.

Historical context

Precision & Scientific Horology (1750 – 1850)

Harrison solves longitude; Mudge invents the lever; Breguet's Paris workshop defines the modern watch.

From 1750 to 1850 the watch became a precision instrument. Mudge's lever escapement, the cylinder escapement, Lépine's thin bar calibre, Breguet's innovations (overcoil, tourbillon, perpétuelle) and the pocket chronometer of Arnold and Earnshaw all date from this period, while verge watches remained common in cheaper production.

Read the period in the timelineMore pocket watches from this periodEarlier: Early Modern Horology

Atlas type guide

Verge and pair-cased watches

After Christiaan Huygens and Robert Hooke applied the balance spring around 1675, the verge watch became a reasonably reliable timekeeper and the minute hand became standard. Through the eighteenth century the typical English watch was a pair-cased verge: a fusee movement with a pierced, engraved balance cock, housed in an inner case and a separate protective outer case, often of repoussé gold, shagreen, tortoiseshell or enamel.

French watches of the same period were thicker 'oignons', later replaced by elegant thinner watches following Jean-Antoine Lépine's bar-bridge calibre of c. 1770. Dutch, Swiss and German makers supplied international markets, and verge watches were made until the mid-nineteenth century as cheaper alternatives to the cylinder and lever.

What to look for

  • The pierced balance cock on the backplate: winged (continental) or with a foot (English); its style dates the watch.
  • Fusee and chain visible through the movement; key winding through the dial (early) or case back.
  • Hallmarks inside English silver or gold cases, which give a date letter.
  • Maker's name and serial number engraved on the backplate; watch papers inside outer cases.
  • Enamel dials (after c. 1720) versus earlier champlevé metal dials.

Dating clues

  • Champlevé dials: c. 1680–1730; white enamel dials thereafter.
  • English case hallmarks give the year of assay to within a year.
  • Verge watches persisted in cheap production until c. 1850.

General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.

Read next:Balance spring (hairspring)Verge escapement

Related records