Skip to content

Clocks · Table clock

A German Gilt Metal and Silvered Brass Table Clock

DocumentedDocumented from an auction catalogue; attribution as stated by the auction house.
Maker / attribution
Johann Heinrich Naumann (source attribution)
Date
First half 18th century
Country of origin
Germany
Object type
Table clock
Dimensions
Height 3 x width 3 1/2 inches
Auction house
Freeman's
Lot
203
Credit line
Freeman's
Catalogue title (original)
A German Gilt Metal and Silvered Brass Table Clock | Freeman's (English)

View the source record (auction lot) ↗ (opens another website in a new tab)Suggest a correction

Record summary

Catalogued by Freeman's (lot 203), this is a table clock attributed to Johann Heinrich Naumann, made in Germany, dated First half 18th century. The Atlas places it in the Early Modern Horology period (1600 – 1750) of its Clocks collection. Recorded dimensions: Height 3 x width 3 1/2 inches. The record is illustrated with 1 photograph.

Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.

Catalogue description

Original object description

Crafted during the first half of the 18th century, this horizontal German table clock is attributed to the Dresden horologist Johann Heinrich Naumann. The drum-shaped case blends silvered brass and gilt metal, resting upon cast claw supports with an underside drop finial and featuring pierced scrolling leaf motifs around the perimeter; internal access is granted via a hinged front bezel with a release pin. Protected by a rounded glass dome, the top dial incorporates an outer Roman numeral ring marked with star half-hour points, an openwork band, and a revolving central numbered plate. The chain-driven single-fusee mechanism bears the signature 'J.H. Naumann' and is noted by the cataloguer as appearing complete, though untested and lacking its winder. Observed condition faults include chipping on the edge of the crystal, an open seam on the upper bezel collar, and an accession number applied in paint on the lower base.

Historical context

Early Modern Horology (1600 – 1750)

Huygens' pendulum and balance spring transform accuracy; English makers develop the anchor and deadbeat escapements.

Huygens's pendulum (1656–57) improved clock accuracy from about a quarter of an hour to under a minute a day. The anchor escapement (c. 1670) and the long seconds pendulum created the longcase clock; London makers such as Fromanteel, Knibb, Tompion and Quare led European clockmaking, and French makers created the Boulle pendule.

Read the period in the timelineMore clocks from this periodEarlier: Renaissance Horology

Atlas type guide

Bracket, table and spring-driven clocks

Spring-driven clocks freed timekeeping from the hanging weight. The coiled mainspring, documented from the fifteenth century, made portable table clocks possible; to even out its declining force, makers used the fusee, a conical pulley connected to the barrel by a gut line or chain. Renaissance table clocks from Augsburg and Nuremberg — drum-shaped, square or tower-shaped in gilt brass — were luxury scientific objects, often with astronomical dials and alarms.

After the pendulum, English makers developed the bracket clock: a wooden case with a carrying handle, a short pendulum with a verge escapement, and often repeating work to sound the hours on demand at night. Later examples use the anchor escapement. In the nineteenth century, 'table clock' became a broad term for spring clocks of every nationality.

What to look for

  • A fusee in the movement (cone-shaped pulley) and the type of line — gut or chain.
  • Verge escapement with a short bob pendulum, often with a decoratively engraved backplate.
  • Repeat cords or buttons that make the clock strike again on demand.
  • Gilt-brass engraved cases and horizontal dials on Renaissance pieces.
  • Case shapes: inverted bell, bell top, break-arch, lancet or balloon.

Dating clues

  • Drum and tower table clocks: c. 1520–1650.
  • Ebony veneered English bracket clocks with verge escapements: c. 1670–1800.
  • Engraved backplates were usual on English clocks until c. 1800, then generally plain.

General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.

Read next:Verge escapementAnchor (recoil) escapement

Related records