
Instruments · Automatic day-date chronometer
1969 Omega Seamaster Chronometer Day-Date (Ref. 166.023)
- Maker / attribution
- Omega (source attribution)
- Date
- 1969
- Historical period
- Quartz Revolution (1969 – 1990)
- Country of origin
- Switzerland
- Object type
- Automatic day-date chronometer
- Materials / technique
- Stainless Steel
- Holding institution
- Craft & Tailored
- Accession / object no.
- OMSM168023
- Credit line
- Craft & Tailored
- Catalogue title (original)
- ساعت مچی امگا Omega Seamaster Chronometer Day-Date رفرنس 168.023 (English)
View the source record ↗ (opens another website in a new tab)Suggest a correction
Record summary
Held and catalogued by Craft & Tailored (object number OMSM168023), this is an automatic day-date chronometer attributed to Omega, made in Switzerland, dated 1969. The Atlas places it in the Quartz Revolution period (1969 – 1990) of its Instruments collection. Materials and techniques recorded by the source: Stainless Steel. The record is illustrated with 1 photograph.
Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.
Catalogue description
Original object description
Dating to 1969, this Omega Seamaster Chronometer Day-Date (designated by reference numbers 168.023 / 166.023) is housed in a 36 mm stainless steel case defined by broad, elongated lugs. Stated to remain unpolished, the case retains its original brushed surfaces, factory beveling, and signed winding crown, mounted on a 19-link Omega 1502 "beads of rice" bracelet showing slack consistent with age. The pristine two-tone textured grey "pie-pan" dial features a day and date window at 3 o'clock, alongside original tritium-lumed hands filled with onyx enamel and tritium hour markers; ultraviolet light verifies that the luminous material survives unblemished with an evenly aged creamy hue. Inside, an automatic chronometer-grade Omega caliber 751 drives the watch; although its historical servicing is undocumented, it is reported to run and maintain time.
Inscriptions & marks
28XXXXXX
Historical context
Quartz Revolution (1969 – 1990)
Seiko's Astron begins mass quartz timekeeping; traditional industries contract sharply.
Electronic timing replaced mechanical instruments in sport, industry and navigation.
Read the period in the timelineMore instruments from this periodEarlier: Modern Mechanical Horology
Atlas type guide
Marine chronometers
A marine chronometer is a precision timekeeper carried at sea to find longitude: the navigator compares local noon, observed with a sextant, with the time at a reference meridian kept by the chronometer. Each hour of difference corresponds to fifteen degrees of longitude. John Harrison proved the method in the 1760s; Pierre Le Roy, Ferdinand Berthoud, John Arnold and Thomas Earnshaw then developed the detent escapement and the compensation balance that made chronometers practical to manufacture.
By the nineteenth century London, Liverpool, Le Locle and Glashütte supplied navies and merchant fleets. A typical box chronometer has a spring-detent escapement, a fusee to equalise mainspring torque, a bimetallic compensation balance with a helical balance spring, and is mounted in gimbals inside a wooden box so that it stays level.
What to look for
- Gimbals and a three-tier wooden box with a glazed inner lid.
- A power-reserve ('up and down') indicator on the dial, usually showing 56 hours on two-day instruments.
- Spring-detent escapement and a cylindrical (helical) balance spring visible through the movement.
- Admiralty or navy marks (broad arrow), and rating certificates from observatories.
- The maker's number on the dial and movement; many makers' registers survive, allowing dating.
Dating clues
- Earnshaw-type spring-detent chronometers became standard after about 1800.
- Auxiliary compensation devices on the balance appear from the mid-nineteenth century.
- Quartz and radio time signals ended routine use of mechanical chronometers in the 1970s and 1980s.
General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.
Read next:Spring detent (chronometer) escapementFuseeBalance spring (hairspring)Detent escapement
Related records
Instruments · 1950–1976
Omega Megaquartz 2400 marine chronometer, 1950–1976
Science Museum Group, London
Instruments · 1960–1979
Stopwatch / timer by Omega, 1960–1979
Science Museum Group, London
Instruments · 1960–1979
Stopwatch / timer by Omega, Switzerland, 1960–1979
Science Museum Group, London
Instruments · 1960–1979
Stopwatch by Omega, Swiss made, single-button type reading 0 - 60 seconds in fifths and 0 - 5 minutes in minutes on subsidiary dial, 1960-79.
Science Museum Group, London
Instruments · 1972
Chronometer by Omega, Switzerland, 1972
Science Museum Group, London
Instruments · 1988
Stopwatch, Switzerland, 1988
Museum of Gothenburg
Instruments · c. 1969
Deck watch no. 4341 by International Watch Co
Royal Museums Greenwich
Instruments · c. 1980
Heuer stopwatch, Set of Three Chronograph Race Timers Retailed By Türler In Z, circa 1980
Antiquorum auction archive, Geneva
