
Clocks · Lantern clock
18th-century brass lantern clock by J. Ettry of Horton
- Maker / attribution
- J. Ettry (source attribution)
- Date
- c. 1720 - 1750
- Historical period
- Early Modern Horology (1600 – 1750)
- Country of origin
- England
- Object type
- Lantern clock
- Holding institution
- Baggott & Co.
- Accession / object no.
- 18th-century-brass-lantern-clock-by-j-ettry-of-horton-6b70e8393f
- Credit line
- Baggott & Co.
- Catalogue title (original)
- 18th century brass lantern clock by J. Ettry of Horton in Antique Lantern Clocks (English)
View the source record ↗ (opens another website in a new tab)Suggest a correction
Record summary
Held and catalogued by Baggott & Co. (object number 18th-century-brass-lantern-clock-by-j-ettry-of-horton-6b70e8393f), this is a lantern clock attributed to J. Ettry, made in England, dated c. 1720 - 1750. The Atlas places it in the Early Modern Horology period (1600 – 1750) of its Clocks collection. The record is illustrated with 1 photograph.
Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.
Catalogue description
Original object description
Originating in England between circa 1720 and 1750, this brass lantern clock is engraved upon its dial with "J. Ettry. Horton". This signature connects the timepiece to the Ettry horological lineage operating out of Horton, close to Devizes in Wiltshire, a group that included two individuals named John as well as Joel and Jacob. Time is indicated by a solitary pierced hand fashioned from steel, pointing toward a 6-inch (15 cm) brass chapter ring marked with Roman numerals and diamond half-hour divisions. Within this ring, the central boss features engraved decoration displaying a petal rosette and star motif. The brass case is ornamented at the top with pierced and engraved foliate frets, positioned alongside turned finials and an overhead bell held by straps, while the entire structure rests upon four turned ball feet. Accompanying the clock is an oak wall bracket with dimensions of 24 inches in height, 8 inches in width, and 8.5 inches in depth, designed with openings to allow the passage of the weight cords. Functionally, the seller notes that it houses a 30-hour weight-driven movement featuring hourly striking, having been brought back into working condition by professional restoration after being purchased in poor condition. Nevertheless, no documentation exists outlining the precise repairs executed, nor are there details concerning the wheel train arrangement, escapement configuration, or side doors.
Historical context
Early Modern Horology (1600 – 1750)
Huygens' pendulum and balance spring transform accuracy; English makers develop the anchor and deadbeat escapements.
Huygens's pendulum (1656–57) improved clock accuracy from about a quarter of an hour to under a minute a day. The anchor escapement (c. 1670) and the long seconds pendulum created the longcase clock; London makers such as Fromanteel, Knibb, Tompion and Quare led European clockmaking, and French makers created the Boulle pendule.
Read the period in the timelineMore clocks from this periodEarlier: Renaissance Horology
Atlas type guide
Lantern, chamber and Gothic clocks
Domestic weight-driven clocks were made in southern Germany, Switzerland, Italy and Flanders from the fifteenth century. These 'Gothic' or chamber clocks have an open iron frame with corner posts, a verge escapement controlled by a foliot or balance wheel, and often an alarm or hour striking on a bell mounted above.
In England the lantern clock appeared around 1600: a brass posted-frame clock with a bell on top under decorative frets, hung on a hook or set on a wall bracket. After about 1658 many were converted to pendulum control, so originality of the escapement is a key question for any surviving example.
What to look for
- Iron (continental) or brass (English) posted frames with turned corner pillars and finials.
- A single hour hand — minute hands are rare before the pendulum era.
- Evidence of conversion: plugged holes, replaced escapement wheels or later pendulums.
- Fret designs and engraving on the dial centre, which help date English lantern clocks.
Dating clues
- Continental Gothic chamber clocks: c. 1450–1650.
- English lantern clocks: c. 1600–1720, with provincial examples later.
- Short 'bob' pendulum conversions after 1658; long pendulums with anchor escapement after c. 1670.
General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.
Related records
Clocks · 1598–1603
Circular table-clock with calendrical and lunar indications made by Nicholas Vallin in London between 1598 and 1603.
Science Museum Group, London
Clocks · 1611
English iron lantern clock, with wheel balance, by John Holloway, Market Lavington, Wiltshire, England, 1611.
Science Museum Group, London
Clocks · 1630
Lantern clock by Francis Forman, England, 1630
Science Museum Group, London
Clocks · 1632–1640
Turret clock, England, 1632–1640
Science Museum Group, London
Clocks · 1645–1655
Balance-wheel brass lantern clock, with two driving weights and one counterweight, by Thomas Knifton, Cross Keys, Lothbury, London, England, 1645–1655.
Science Museum Group, London
Clocks · c. 1650
Lantern alarm clock, silver, by David Bouquet, circa 1650
Victoria and Albert Museum, London
Clocks · 1650–1660
Lantern clock by Peter Closon, England, 1650–1660
Science Museum Group, London
Clocks · c. 1660
Longcase clock, c. 1660, English, made by Ahasuerus Fromanteel
Victoria and Albert Museum, London
