Instruments · Marine chronometer
Marine chronometer by Bliss & Creighton, New York, c. 1850–1865
- Maker / attribution
- Bliss & Creighton (maker)
- Date
- c. 1850–1865
- Historical period
- Industrial Revolution (1850 – 1900)
- Country of origin
- United Kingdom
- Place
- New York
- Object type
- Marine chronometer
- Materials / technique
- brass, mahogany
- Dimensions
- Height 18 cm
- Stock no.
- SKU 438
- Credit line
- Dealer listing, Howard Walwyn (SKU 438)
- Catalogue title (original)
- Bliss & Creighton, N° 1062. A fine 2-day marine chronometer in its original brass bound mahogany box. (English)
View the source record (dealer listing) ↗ (opens another website in a new tab)Suggest a correction
Record summary
Catalogued by Howard Walwyn Fine Antique Clocks (dealer), London (stock number SKU 438), this is a marine chronometer by Bliss & Creighton, made in New York, United Kingdom, dated c. 1850–1865. The Atlas places it in the Industrial Revolution period (1850 – 1900) of its Instruments collection. Materials and techniques recorded by the source: brass, mahogany. Recorded dimensions: Height 18 cm. The record is illustrated with 1 photograph.
Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.
Catalogue description
Dealer description — Howard Walwyn
A fine 2-day marine chronometer in its original brass bound mahogany box. The 56-hour chain fusee movement has an Earnshaw-type spring detent escapement, blued steel helical spring, and a standard balance with circular timing weights. The 3 ¾ inch round silvered brass dial has Roman hour numerals and an outer double minute band. There is a subsidiary dial for up/down below XII and a subsidiary seconds above VI. The maker’s signature and address are inscribed across the middle between IX and III. It retains its original spade tipped gold hands. The beautifully patinated and figured mahogany three tiered case has brass inset corners on the top and on every tier. To each side there is a raised brass carrying handle. The dial is numbered 1062 in the centre and the number is also stamped on the front plate of the movement. Date : circa 1850-1865 Height : 7 in (18 cm) Width : 7 in (18 cm) Depth : 7 in (18 cm) * Bliss & Creighton are listed on page 110 of Tony Mercer’s Revised Edition of Chronometer Makers of the World , 2004 as working in Brooklyn, New York circa 1860. Frederick Creighton died in 1864. In 1848 they had advertised that their chronometers were entirely American made. HW6184
Historical context
Industrial Revolution (1850 – 1900)
American interchangeable-parts manufacture; railroad time standards; Swiss and German factory systems.
Instruments spread into industry, science and sport: stopwatches, chronoscopes, metronomes, watchmen's clocks and time recorders.
Read the period in the timelineMore instruments from this periodEarlier: Precision & Scientific Horology
Atlas type guide
Marine chronometers
A marine chronometer is a precision timekeeper carried at sea to find longitude: the navigator compares local noon, observed with a sextant, with the time at a reference meridian kept by the chronometer. Each hour of difference corresponds to fifteen degrees of longitude. John Harrison proved the method in the 1760s; Pierre Le Roy, Ferdinand Berthoud, John Arnold and Thomas Earnshaw then developed the detent escapement and the compensation balance that made chronometers practical to manufacture.
By the nineteenth century London, Liverpool, Le Locle and Glashütte supplied navies and merchant fleets. A typical box chronometer has a spring-detent escapement, a fusee to equalise mainspring torque, a bimetallic compensation balance with a helical balance spring, and is mounted in gimbals inside a wooden box so that it stays level.
What to look for
- Gimbals and a three-tier wooden box with a glazed inner lid.
- A power-reserve ('up and down') indicator on the dial, usually showing 56 hours on two-day instruments.
- Spring-detent escapement and a cylindrical (helical) balance spring visible through the movement.
- Admiralty or navy marks (broad arrow), and rating certificates from observatories.
- The maker's number on the dial and movement; many makers' registers survive, allowing dating.
Dating clues
- Earnshaw-type spring-detent chronometers became standard after about 1800.
- Auxiliary compensation devices on the balance appear from the mid-nineteenth century.
- Quartz and radio time signals ended routine use of mechanical chronometers in the 1970s and 1980s.
General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.
Related records
Instruments · 1850–1865
Marine chronometer by Bliss & Creighton, New York, 1850–1865
Howard Walwyn Fine Antique Clocks (dealer), London
Instruments · c. 1875–1880
Marine chronometer by John Bliss and Co., New York, c. 1875–1880
Howard Walwyn Fine Antique Clocks (dealer), London
Instruments · 1831–1870
Column dial by Henry Robert, Horloger, au Palais Royal, paper on wood, early 19th century
Science Museum Group, London
Instruments · 1831–1870
Column sundial for latitude 52 degrees, in boxwood with paper scales by Henry Robert, Horloger, Au Palais Royal, Paris, c.1832
Science Museum Group, London
Instruments · 1831–1870
Horizontal compass sundial for latitude for 42 degrees, signed "Asling & Bird, London", in watch type case. English, c.1840.
Science Museum Group, London
Instruments · 1831–1870
Sundial by Henry Robert, France, 1831–1870
Science Museum Group, London
Instruments · 1831–1870
Sundial, in mahogany case
Science Museum Group, London
Instruments · 1848–1874
Chronoscope of Hipp type
Science Museum Group, London