Skip to content

Pocket Watches · Diving watch

Enicar Sherpa Super Dive

DocumentedDocumented from the holding institution's catalogue record.
Maker / attribution
Enicar (source attribution)
Date
1960s
Country of origin
Switzerland
Object type
Diving watch
Dimensions
41mm
Holding institution
Analog:Shift
Accession / object no.
enicar-sherpa-super-dive-8c9685004e
Credit line
Analog:Shift
Catalogue title (original)
ساعت مچی غواصی Enicar Sherpa Super Dive با قاب سوپرکمپرسور (English)

View the source record ↗ (opens another website in a new tab)Suggest a correction

Record summary

Held and catalogued by Analog:Shift (object number enicar-sherpa-super-dive-8c9685004e), this is a diving watch attributed to Enicar, made in Switzerland, dated 1960s. The Atlas places it in the Modern Mechanical Horology period (1945 – 1969) of its Pocket Watches collection. Recorded dimensions: 41mm. The record is illustrated with 1 photograph.

Assembled from the source record's structured fields. Dates and attributions are given as the source states them; where a field is missing the Atlas leaves it blank rather than estimating.

Catalogue description

Original object description

Manufactured in Switzerland during the 1960s, this vintage aquatic watch features a 41 mm Ervin Piquerez S.A. (EPSA) SuperCompressor case. Eschewing threaded screw-down crowns, its case construction relies on a spring-tensioned bayonet mechanism affixed to a multifaceted polygonal back, preventing thread wear under pressure while delivering water resistance exceeding 600 feet. Cross-hatched dual crowns are situated at the 2 and 4 o'clock positions: one adjusts the time, while the other manipulates an inner rotating bezel beneath the crystal. The dark dial is appointed with patinated luminescent applied hour indexes, a 3 o'clock date aperture printed in red, and the "Sherpa Super-DIVE" designation below the Enicar crest, powered by a self-winding caliber. Originating from the earlier Seapearl line and named after Himalayan mountain guides, Enicar's Sherpa series debuted in 1958. During the 1960s and 1970s, EPSA's SuperCompressor architecture was widely utilized across high-end dive watches, with the Super Dive representing a focused variant in Enicar's broader sports lineup.

Historical context

Modern Mechanical Horology (1945 – 1969)

Tool watches for divers, pilots and astronauts; electric watches anticipate the electronic age.

After 1945 the pocket watch became a niche product — presentation and railway watches, inexpensive pin-lever watches, and commemorative pieces — while most innovation moved to the wrist.

Read the period in the timelineMore pocket watches from this periodEarlier: Golden Age of Mechanical Watchmaking

Atlas type guide

Pocket watches

The pocket watch was the dominant personal timekeeper from the late seventeenth century until the First World War. Its development tracks the history of the escapement: verge watches with fusees until the late eighteenth century; Thomas Mudge's lever escapement (c. 1755) and the cylinder escapement popularised by George Graham and later by Swiss makers; and the Swiss and English lever watches of the nineteenth century. Lépine's bar-bridge calibre and keyless winding made watches thinner and easier to use.

Industrialisation transformed the trade: American factories such as Waltham (from 1850) and Elgin produced interchangeable parts by machine, and Swiss makers responded with their own mechanisation after the 1876 Philadelphia Exhibition. By 1900 a reliable watch was affordable to millions; the finest makers continued to produce complications and precision watches.

What to look for

  • The escapement: verge (crown wheel), cylinder, duplex, English or Swiss lever.
  • Key winding (a square arbor in dial or back) or keyless crown winding.
  • Signatures and serial numbers on the movement, dial and inside case back.
  • Hallmarks, case maker's marks and gold or silver standards stamped in the case.
  • Dial material: enamel, silver, gold, later printed metal.

Dating clues

  • Verge watches dominate before c. 1800; cylinder watches c. 1770–1900; lever watches after c. 1820.
  • Keyless winding: increasingly common after c. 1860.
  • Manufacturer serial number lists exist for Waltham, Elgin, Longines, Omega, Patek Philippe and others.

General guidance written by the Atlas editors about this kind of object. It is not a statement about this particular piece; for that, rely on the source record above and on physical examination.

Read next:Verge escapementDetached lever escapementFuseeIdentification Centre

Related records